2025 Vermeer® Mower Conditioners MC150

Information

2025 Vermeer® Mower Conditioners MC150

Simple and convenient are two key words to describe the Q3® cutter bar. Quick and convenient to check and replace key components — the Quick-Clip® blade retention system, Quick-Change™ shear ring and quick-check oil for each individual cutter unit.

Backed by 3-year cutter bar coverage.

Say goodbye to a tractor that’s dedicated to only mowing for the summer. Two hitch options provide a simple, one-person hookup — the drawbar swivel hitch or patented 2-point Quick Hitch — to help you get out to the field in no time.

Optimize hay quality with two different types of conditioners to select from for your operation. Steel rollers offer durability and powerful crimping action while rubber rollers focus on leaf retention of the crop.

Achieve a consistent, clean cut with hydraulic suspension. With this system, operators can conveniently adjust down pressure based on field conditions with the simple twist of a knob.

Adjust to different crops and conditions on the go. Toolless hydraulic pitch adjustment allows operators to change the angle of the blades on the cutter bar to help them achieve maximized yield while minimizing damage to the field.

Looking for a second cut as good as the first? Standard topping stops help protect the field by maintaining the integrity of the cutter bar flotation — preventing it from hitting the ground.

Features may include:

  • Backed by generations of hay and forage expertise
  • Clean, consistent cut
  • Fast dry-down for optimal nutrition

Photos

Highlights

  • Blackshear, Georgia
  • 2025
  • Vermeer®
  • Mower Conditioners MC150
  • Available
  • Cutting: 15 ft | Conditioner: 118 in
  • Cut: 1 in - 8 in (2.5 cm - 20 cm)

Specifications

  • 2025
  • Vermeer®
  • Mower Conditioners
  • MC150
  • Conditioner
  • 1,000 rpm | Recommended: 105 hp
  • Nitrogen-charged accumulator suspension system
  • 33X15.5-16.5
  • Disc: 2700 rpm | Roller: 740 rpm
  • 1900 psi
  • Rate: 6 gpm
  • 2 double-acting
  • Tongue: Drawbar with swivel gearbox OR 2-point with swivel gearbox, category II or III N
  • Mower swung out offset: 80 in | Number of Discs: 10 | Disc Diameter: 23 in | Number of Blades: 20 | Curtain material: 1,400 gm/m2 polyester woven material with flexible PVC covering | Roller Diameter: 9.3 in
  • 73 in
  • 15 ft
  • 15.3 ft
  • 29.3 ft
  • Cut: 1 in - 8 in (2.5 cm - 20 cm)
  • Ends up: 15.3 ft
  • Cutter bar clearance: 17 in
  • Cutting: 15 ft | Conditioner: 118 in
  • Minimum: 62 in | Maximum: 112 in
  • Total: 7000 lbs | With steel roller conditioner: 7000 lbs | Tongue: 1700 lbs
  • Torque Protection: Friction over - running clutch — cutter bar; Banded V-belt — rollers | Angle Adjustment: Hydraulic pitch control | Type: Intermeshing steel rollers or rubber rollers | Conditioner Drive: 4-band banded V-belt
  • Q3® cutter bar