Dixon Tractor Company

  • 3294 US-84
  • Blackshear, GA 31516
  • Call Us: (912) 449-6673
  • //www.dixontractor.com/
Print This Page

2025 Vermeer® Trailed Mowers TM1200

Information

2025 Vermeer® Trailed Mowers TM1200

Cutter bars are staggered and overlap for complete cutting action down the middle.

Help reduce labor and fuel by using one wide swath mower to cut more acres than multiple 3-point mowers.

Help protect your cutter bar and your field. The suspension system complements the independent cutter bars, allowing each to contour the ground and operate at different levels.

Float over fields and contoured terrain with a nitrogen-charged accumulator flotation system that adjusts for varying field and crop conditions.

Get more protection from unseen obstacles with the wide skid shoes and suspension system that help protect the cutter bars and the friction clutch, which protects the drive system.

Gain easy access to the cutter bars with flip-up curtains.

Replace blades in seconds using the exclusive Quick-Clip® blade retention system.

Minimize maintenance with 12 self-contained discs, each with their own set of gears, bearings and lubricants. Gears stay in the grease — even when mowing at extreme angles.

Features may include:

  • Wide cutting width, narrow transport width
  • Complete, consistent cutting action
  • Minimized, convenient maintenance

Photos

Highlights

  • Blackshear, Georgia
  • 2025
  • Vermeer®
  • Trailed Mowers TM1200
  • Available
  • Working: 78 in | Cut: 1.3 in - 3 in (3.2 cm - 7.6 cm)

Specifications

  • 2025
  • Vermeer®
  • Trailed Mowers
  • TM1200
  • Mower Conditioners
  • Recommended: 85 hp
  • 540 or 1000 rpm
  • Torque protection: friction disc clutch
  • Hydraulic
  • 31x13.5-15
  • Disc: 2950 rpm
  • Rate: 6 gpm
  • Hydraulic: 1500 psi
  • 2 double-acting
  • 2-point with swivel gearbox, category II or III N
  • Mower swung out offset: 50 in | Number of Discs: 12 | Disc Diameter: 19.7 in | Number of Blades: 24 | Curtain material: 1400 g/m2 polyester woven material with flexible PVC covering
  • 22 ft
  • 22 ft
  • 78 in
  • 15.5 ft
  • Working: 18 ft
  • Cutter bar clearance: 16 in
  • Working: 78 in | Cut: 1.3 in - 3 in (3.2 cm - 7.6 cm)
  • Total: 5900 lbs | Tongue: 1580 lbs
  • Angle Adjustment: Hydraulic pitch control