2025 Vermeer® Stump Cutters SC1052

Information

2025 Vermeer® Stump Cutters SC1052

A unique four-bar linkage maximizes cutting width by moving the cutter wheel away from the machine as the boom drops.

Experience exclusive stump cutting technology that maximizes your machine at the stump, such as the Vermeer cutting system, SmartSweep™ control system, and the operator presence system.

The 115-hp (86-kW) gas engine provides high productivity and speed, resulting in maximum cutting power and minimal maintenance needs, to help you complete more jobs in a day.

Without the dual wheels installed, the SC1052 is only 35 in (89 cm) wide, allowing it to enter narrow backyard gates and access tight jobsites.

The SC1052 transfers power and torque to all four wheels, navigating tough terrain with minimal disturbance. Disengage differential locks for better maneuverability or engage them for maximum torque on uneven ground.

Options for both the Vermeer cutting system (VCS) or Yellow Jacket™ cutter system give you the choice to select the wheel that is right for your operation and ground conditions.

A standard backfill blade minimizes the need for manual cleanup on the job.

Variable drive speed improves maneuverability during transport and provides greater control while grinding.

The swing out control station helps protect the operator from thrown objects while providing optimal visibility at the stump.

The operator presence system allows the cutter wheel to automatically stop when the operator releases the hydraulic cutter wheel controls.

Features may include:

  • Maximized cutting dimensions
  • An industrial design for optimized performance and efficiency
  • Fully featured for optimized productivity

Photos

Highlights

  • Blackshear, Georgia
  • 2025
  • Vermeer®
  • Stump Cutters SC1052
  • Gas
  • Available
  • 35 in | Chip Blade Dimension: 34-in (86.4-cm)
  • 80 in | Chip Blade Dimension 13.8-in (35.1-cm)

Specifications

  • 2025
  • Vermeer®
  • Stump Cutters
  • SC1052
  • Stump
  • 6
  • Origin
  • 4.3 L
  • 231 ft-lb
  • Gross Horsepower (Maximum): 115 hp
  • Medium: Extended Life (ELC) Nitrite Free (NF)
  • Two-stage dry type with maintenance-free pre-cleaner, restriction indicator, evacuator valve and safety element
  • Max Fuel Consumption: 7.6 gph
  • Gas
  • Hydrostatic transmission
  • U Joints: 2 standard with double-lip seals
  • Rigid at dual drive wheels; oscillating front steerable axle
  • Spring-applied, hydraulic release at planetary drives
  • Duals, 23x8.5-14
  • Option One Front: 20x8.00-10
  • Option One Front: 10 in x 6 in (25.4 cm x 15.2 cm) | Rear: 14-in x 6-in (35.6-cm x 15.2-cm) rim
  • 950 CCA
  • 12V
  • 70 Amp
  • Cutterwheel: 1014 rpm | Low Travel: 80 ft/min | High Travel: 140 ft/min
  • 111 dB(A)
  • Spin-on
  • System relief: 5800 psi
  • Flow at Maximum: 56 gpm
  • System: 2 closed loops and 1 open loop | Filtration Method: Suction strainers and 6-micron return filter
  • Warning: Low oil pressure and high engine temperature | Remote Display: LED
  • Maximum Angle of Continuous Operation: 30 deg Cutterwheel Diameter: 26 in | Cutterwheel Thickness: .6 in | Cutterwheel Straight Line: 72 in | Cutterwheel Cut Above Ground: 31 in | Cutterwheel Cut Below Ground: 25 in | Lower Gearbox: 90 deg | Degree of Oscillation: 15 deg | Blade Travel Above Ground: 14 in | Remote Range: 300 ft (91.4 m)
  • 152 in
  • 35 in | Chip Blade Dimension: 34-in (86.4-cm)
  • 80 in | Chip Blade Dimension 13.8-in (35.1-cm)
  • Transport (without duals): 35 in | (with duals): 56 in
  • 18.4 gal
  • Tank: 18 gal
  • Chip Containment: 28.2 cu ft
  • Fan: Engine-driven | Number of Teeth: 33 | Number of Indexes: 2 | Number of Pockets: 6 | Reversible Pockets/Teeth: 30 | Directional Control: Electric over hydraulic | Switches: Cutterwheel drive engagement; AutoSweep adjustment, differential lock, control panel selector (swingout or auxiliary), two-speed ground drive, blade, steering, boom controls and creep switches plus propel system joystick | Controller: Danfoss | Display: Multi-function display (MFD) | Shutdown System: High coolant or hyd oil temperature, low oil pressure | Control Station: Description Swing-out control station with three available positions plus auxiliary control station | Operator Vision Shield Description: Abrasion-resistant coated polycarbonate, 3/16-in thick | Steerable Axle Type: Hydraulic, oscillating | Remote Functions: Engine start/stop, throttle, cutter wheel engage, swing, raise/lower/blade/propel
  • Volume with Filter: 7.5 qt | Lower Gearbox: 2.7 qt
  • Option One: 4460 lbs
  • Recommended: 10W-30 | Type - Lower Gearbox: Syn 75W90 | Recommended: Vermeer HyPower 68
  • Frame Description: Welded tube and plate steel