Dixon Tractor Company

  • 3294 US-84
  • Blackshear, GA 31516
  • Call Us: (912) 449-6673
  • //www.dixontractor.com/
Print This Page

2025 Vermeer® Stump Cutters SC30TX

Information

2025 Vermeer® Stump Cutters SC30TX

Exclusive SmartSweep™ control system monitors engine load and provides continuous feedback, resulting in a smooth and consistent cutter wheel sweep rate.

Options for both the Vermeer cutting system (VCS) or Yellow Jacket™ cutter system give you the choice to select the wheel that is right for your operation and ground conditions.

A 25-hp (18.4-kW) EFI gas engine starts well in colder weather, makes choke cables obsolete and offers improved fuel economy over comparable carbureted gas engines.

The hydraulically driven cutter wheel and hydrostatic ground drive eliminate belts or chain drives, reducing service and maintenance needs.

An accessible design provides quick access to the engine and daily service components for ease of maintenance.

The operator presence system allows the cutter wheel to automatically stop when the operator releases the hydraulic cutter wheel controls.

VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.

Features may include:

  • A compact footprint for maneuverability and access
  • Designed with ease of maintenance in mind
  • Safety-focused design

Photos

Highlights

  • Blackshear, Georgia
  • 2025
  • Vermeer®
  • Stump Cutters SC30TX
  • ECH740
  • Control Station Description: Fixed-rear
  • Gas
  • Available
  • 35 in
  • 49 in

Specifications

  • 2025
  • Vermeer®
  • Stump Cutters
  • SC30TX
  • Stump
  • ECH740
  • 2
  • Kohler
  • 42 ft-lb
  • Spin-on
  • Medium: Air/oil
  • Gross (Maximum): 25 hp
  • 6 " (15.2 cm) 2-Stage dry
  • Track Drive: Geroter
  • Max Fuel Consumption: 2.4 gph
  • Gas
  • Lower: Hydraulic motor
  • Track: Hydrostatic
  • 405
  • System Voltage: 12 | Switches: Cutter wheel drive
  • Cutterwheel: 1110 rpm | High Travel: 3.2 mph
  • Soft Ground: 3.4 psi
  • Track Drive: Hydrostatic
  • System Type: Open loop
  • System relief: 2750 psi | track: 2900 psi (200 bar)
  • Pump Flow at Maximum RPM: 16 gpm | track: 11.4 gpm (43.1 L/min)
  • Control Station Description: Fixed-rear
  • Cutterwheel Diameter: 16 in | Cutterwheel Thickness: .5 in | Cutterwheel Straight Line Dimension: 35.5 in | Cutterwheel Cut Above Ground: 25 in | Cutterwheel Cut Below Ground: 12 in | Maximum Angle of Continuous Operation: 25 deg | Chip Containment: 2.2 cu ft
  • 94 in
  • 35 in
  • 49 in
  • On Ground: 31.4 " (79.7 cm)
  • Retracted: 35 " (88.9 cm) | Extended: 35 " (88.9 cm)
  • Tank: 6.8 gal
  • Tank: 9 gal
  • Oil Volume with Filter: 2 qt
  • 1550 lbs
  • Number of Teeth: 16 | Number of Indexes: 2 | Number of Pockets: 16 | Filtration Method: Inline return filter | Type of Idler: Cast | Number of Idlers: 5
  • Rubber 7 " (17.8 cm) width
  • Recommended Oil: Kohler oil or API CH4/SJ / hydraulic: ISO 68