2025 Vermeer® Stump Cutters SC362

Information

2025 Vermeer® Stump Cutters SC362

A 35-hp (26.1-kW) Vanguard gasoline engine offers low vibration, low emissions and a limited 3-year warranty.

SmartSweep™ control system helps improve efficiency and productivity at the stump while helping to minimize wear and tear on the machine.

The self-propelled hydraulic drive system improves maneuverability and transport.

Move easily between stumps with the selectable 2-speed ground drive.

Without the dual wheels installed, the SC362 is only 35 in (89 cm) wide, allowing it to enter narrow backyard gates and access tight jobsites.

Options for both the Vermeer cutting system (VCS) or Yellow Jacket™ cutter system give you the choice to select the wheel that is right for your operation and ground conditions.

All of the belts are found on one side of the machine for convenient servicing and can be adjusted independently without affecting the other belts.

Protect your stump cutter investment with extended service coverage options.

The operator presence system allows the cutter wheel to automatically stop when the operator releases the hydraulic cutter wheel controls.

VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.

Features may include:

  • Designed for maneuverability and efficiency
  • Simplicity that enables productivity
  • Built for ease of maintenance

Photos

Highlights

  • Blackshear, Georgia
  • 2025
  • Vermeer®
  • Stump Cutters SC362
  • Control Station Description: Fixed side location
  • Gasoline
  • Available
  • 49.8 in
  • 53 in

Specifications

  • 2025
  • Vermeer®
  • Stump Cutters
  • SC362
  • Stump
  • 53 ft-lb
  • Spin-on
  • Medium: Air
  • Briggs & Stratton Vanguard
  • Gross Horsepower (Maximum): 35 hp
  • Dry-type safety element and restriction indicator
  • Max Fuel Consumption: 3.2 gph
  • Gasoline
  • Electric clutch with brake
  • Steerable Axle Type: Hydraulic steering, oscillating axle
  • Rigid/Fixed (Rear)
  • 5.7" x 8" (14.5 x 20.3 cm) duals standard
  • 400 CCA
  • 20 amp
  • System Voltage: 12 V | Shutdown System: Engine low oil pressure
  • Cutterwheel: 1400 rpm | Low Travel: 66 ft/min | High Travel: 133 ft/min
  • 106
  • System relief: 2030 psi
  • Pump Flow at Maximum RPM: 3.7 gpm
  • System Type: Open-loop series system | Flow Control: AutoSweep® (option) or 2 speed ground drive
  • Control Station Description: Fixed side location
  • Warning: Operator presence status, clutch engage/disengagement status
  • Cutterwheel Diameter without Teeth: 17 in | Cutterwheel Thickness: .5 in | Cutterwheel Straight Line Dimension: 47 in | Cutterwheel Cut Above Ground: 24 in | Cutterwheel Cut Below Ground: 15 in | Chip Containment: 7.7 cu ft | Jackshaft Dimension: 1.3 | Bearing Dimensions: 1.3 bore | Cutterwheel Shaft: 1.8" (4.8 cm) | Bearing Dimensions - Secondary Belt: 1.8" (4.8 cm) double spherical roller pillow block
  • 110 in
  • 49.8 in
  • 53 in
  • Transport: 53 in
  • Transport (without duals): 35 in | with duals: 49.8 in
  • 6 gal
  • Tank: 4 gal
  • With Filter: 2 qt
  • 1320 lbs
  • Number of Teeth: 16 | Number of Indexes: 2 | Number of Pockets: 16 | Reversible Pocket: 16 | Jackshaft Bearing Type: Sealed ball | Filtration Method: Pump suction strainer (100 mesh) and 6 micron return filter | Directional Control: Manual hydraulic value | Controller: Vermeer ACS | Switches: Two-speed ground drive, clutch engage/disengage, operator presence handles | Gauges: Hourmeter | Control Station Description: Fixed side location | Axle: Rigid
  • V-Belt
  • Recommended: 10W30 / hydraulic: Vermeer HyPower 68
  • Number of Primary Belts: 2 individual (matched pair) | Number of Secondary Belts: 6 Banded