Dixon Tractor Company

  • 3294 US-84
  • Blackshear, GA 31516
  • Call Us: (912) 449-6673
  • //www.dixontractor.com/
Print This Page

2025 Vermeer® Stump Cutters SC802

Information

2025 Vermeer® Stump Cutters SC802

Tackle large tasks effortlessly with the SC802 stump cutter, powered by a robust 74-hp (55.2-kW) turbo-charged engine.

SmartSweep™ control system helps improve efficiency and productivity at the stump while helping to minimize wear and tear on the machine.

A 96-in (243.8 cm) straight-line cutting capacity provides extensive coverage, minimizing the need to reposition the machine.

Options for both the Vermeer cutting system (VCS) or Yellow Jacket™ cutter system give you the choice to select the wheel that is right for your operation and ground conditions.

Independent rubber torsion suspension.

A 60-in (152.4-cm) tongue extension helps reduce the amount of repositioning needed on a jobsite.

The 68-ft3 (1.9-m3) containment area under the rear deck collects chips as you work, helping you clean up the job faster.

A 25-gal (94-L) fuel tank means you can spend less time fueling up and more time grinding on the job.

The operator presence system allows the cutter wheel to automatically stop when the operator releases the hydraulic cutter wheel controls.

The swing out control station helps protect the operator from thrown objects while providing optimal visibility at the stump.

VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.

Features may include:

  • The tow-behind powerhouse
  • Designed for productive performance
  • Maximized cutting dimensions

Photos

Highlights

  • Blackshear, Georgia
  • 2025
  • Vermeer®
  • Stump Cutters SC802
  • TD2.9L
  • Diesel
  • Available
  • 79.8 in
  • 79 in

Specifications

  • 2025
  • Vermeer®
  • Stump Cutters
  • SC802
  • Stump
  • TD2.9L
  • 4
  • Spin-on
  • 188 ft-lb
  • Tier 4 Final
  • Gross (Maximum): 74 hp
  • Deutz | Option One: Dexter
  • Medium: Air-cooled head, oil-cooled block
  • Dry-type with precleaner, restriction indicator, evacuator valve and safety element
  • Max Fuel Consumption: 4.6 gph
  • Diesel
  • Electric clutch with brake
  • Upper: Straight bevel | Lower: Straight bevel
  • Rubber dampened with 2 universal joints | U Joints: Two standard with double lip seal
  • Rubber torsional axle
  • Self-adjusting 12" x 2" (30.5 x 5.1 cm) electric with breakaway switch, max. total capacity 6000 lb (2721.6 kg)
  • 10x16.5LT Tubeless, bias ply, load ranged D
  • ST235/80/R16 load range G | 16 in x 6 in (40.6 cm x 15.2 cm) 6 bolt circle
  • 950
  • 95 amp
  • System Voltage: 12 Volt | Shutdown System: Low oil pressure, high engine coolant temp
  • Cutterwheel: Cutterwheel Speed 881 rpm
  • 108.0 dB(a) / Option Two: 112.3 dB(a)
  • System relief: 2000 psi
  • Pump Flow at Maximum RPM: 3.2 gpm
  • System Type: Gear pump, pressure balanced
  • Pin, pintle, 2 1/6" (1.6 cm) ball
  • Reinforced 4" (10.2 cm) square tubing
  • Warning: Engine warning | Trailer Type: LED
  • Maximum Angle of Continuous Operation: 30 deg | Cutterwheel Diameter without Teeth: 28 in | Cutterwheel Thickness: .9 in | Cutterwheel Straight Line Dimension: 96 in | Cutterwheel Cut Above Ground: 35 in | Cutterwheel Cut Below Ground: 25 in | Chip Containment: 68 cu ft | Tongue Extension: 60" (152.4 cm)
  • 79.8 in
  • 79 in
  • Tongue In: 167.3 in | Extended: 234 in | 167.3 in
  • 25 gal
  • Tank: 6 gal
  • Volume with Filter: 10.6 qt | 1.7 qt | Lower Gearbox: 2.2 qt
  • Option One: 4400 lbs | Option Two: 4040 lbs | Tongue Option One: 460 lbs | Option Two: 380 lbs
  • Number of Teeth: 42 | Number of Indexes: 2 | Number of Pockets: 42 | Filtration Method: 6 micron full flow return filter; suction strainer | Switches: Ignition, throttle and clutch | Controller: Operation with AutoSweep | Display: Multifunction Display (MFD) | Operator Vision Shield Description: Abrasion-resistant coated poly carbonate | Gauges: MFD Multifunction LCD Display
  • Recommended: 15W40 Deutz | SAE 75W90 synthetic gear oil | Lower Gearbox: SAE 75W90 synthetic gear oil | hydraulic Recommended: Vermeer HyPower 68