2025 Vermeer® Trommel Screens TR6450

Information

2025 Vermeer® Trommel Screens TR6450

Tensioning the screens allows for maximum strength with a finer wire gauge, optimizing production through increased open area. In high moisture applications, the use of stainless-steel screens can be very useful.

With a hopper height of 9.5 ft (2.9 m), the operator can load material without having to build a ramp to the machine, decreasing loading cycle times.

The ability to adjust the working trommel from the loader is made possible by the full-function remote control, which allows you to adjust screening functions, raise and lower conveyors, pause the hopper, reverse the engine fan and more.

The hydraulic-driven chain drive system provides positive drum drive and allows the drum to lift off of the cog for service and maintenance.

Features may include:

  • Class-leading jobsite versatility features
  • Complete control at the hands of the operator
  • Spend less time on maintenance and more time being productive

Photos

Highlights

  • Blackshear, Georgia
  • 2025
  • Vermeer®
  • Trommel Screens TR6450
  • Model: 3.6L
  • Available
  • Operation: 43.3 ft | Apron Opening: 37.5 in | Conveyor Belt: 30 in | Self-Cleaning Tail Pulley Dimensions: 38-in (96.5-cm) wide
  • Operation: 16.7 ft | Apron Opening: 45 in | Hopper: 9.5 ft (2.9 m) from ground level at operating incline | Conveyor Belt Stacking: 10.5 ft (3.2 m) (conveyor @ 30 deg)

Specifications

  • 2025
  • Vermeer®
  • Trommel Screens
  • TR6450
  • General
  • Model: 3.6L
  • 4
  • CAT
  • Spin-on
  • Dual element
  • Tier 4F (Stage V)
  • Rating: 120 hp (90 kW)
  • Drum: 35.5 in³ (630 cm³) displacement | Conveyor: 16.7 cu-in / fines: 14.2 cu-in
  • Fuel Consumption: 3 gph (11.4 L/hr)
  • Leaf spring
  • 445/50 R22.5
  • 950 CCA
  • System Voltage: 12-V, 120-amp alternator
  • Apron Conveyor: 0-15 ft/min | Drum: 0-25 rpm | Collecting Belt: 360 ft/min | Fines Belt: 400 ft/min
  • Drum Operation: 0-35.9 gpm (0-135.9 L/min)
  • Four independent hydraulic jacklegs | Collecting conveyor frame: Part of trailer frame | Fines Conveyor Frame: Engineered structural frame
  • Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles): 35 deg | Hopper Opening: 11.7 ft x 5.3 ft (3.6 m x 1.6 m) | Apron Conveyor Rollers: 5 in (12.7 cm) | Drum Diameter: 6.5 ft | Thrust Bearing Diameter: 4 in | Thrust Bearing Face: 2 in | Drum Angle Adjustability: 0-5 deg | Brush Diameter: 14 in | Brush Assembly Support: (2) 1.25 in (3.2 cm) sealed ball bearings/brush | Head/Tail Pulley Type: 8-in (20.3-cm) crowned | Head Pulley Bearing: 1.75-in (4.4-cm) double roller / 1.5-in (3.8-cm) pillow block | Tail Pulley Takeup: 6 in | Self-Cleaning Return Idlers: (3) 4-in (10.2-cm) rubber disc | Head Pulley Type: 8-in (20.3-cm) crowned | Self-Cleaning Tail Pulley Dimensions: 8-in (20.3-cm) diameter, crowned wing pulley, 1.75-in (4.4-cm) shaft | Head Pulley Takeup: 8 in | Self-Cleaning Return Idlers: (3) 4-in (10.2-cm) diameter | Conveyor Belt Type: 220 lb (99.8 kg), 2-ply, 2/16-in x 1/16-in (3.2-mm x 1.6-mm)
  • 39.5 ft
  • 119.5 in
  • 13.2 ft
  • Bottom: 37.5 in
  • Apron Conveyor Belt: 42 in | Belt: 36 in
  • Operation: 54.2 ft | Apron Conveyor: 12.4 ft | Drum: 20 ft | Collecting Conveyor: 16 ft | Fines Conveyor: 23.5 ft
  • Operation: 43.3 ft | Apron Opening: 37.5 in | Conveyor Belt: 30 in | Self-Cleaning Tail Pulley Dimensions: 38-in (96.5-cm) wide
  • Operation: 16.7 ft | Apron Opening: 45 in | Hopper: 9.5 ft (2.9 m) from ground level at operating incline | Conveyor Belt Stacking: 10.5 ft (3.2 m) (conveyor @ 30 deg)
  • 6.5 cu yd
  • Tank: 50 gal
  • Tank: 80 gal
  • Volume with Filter: 11.2 qt
  • 180 yd³ (137.6 m³) per hour with 0.5-in (1.3-cm) screens installed and material with moisture less than 40%
  • 39000 lbs | Hitch: 5300 lbs
  • Radiator Fan: Suction | Apron Conveyor Rollers: CEMA "D" x 17 | Drum Drive Chain: 140 extended pin/extended width | Maximum Screen Panels: 8 | Rubber Flashing: Adjustable corded rubber | Idler Type: 4 in (10.2 cm) CEMA "B" straight | Troughing Idler Type: 20 deg CEMA "B" with permanently sealed bearings spaced at 40-in (101.6-cm) centers
  • Recommended: Mobil 15W40
  • Drum Support Description: 8 polyurethane trunnion wheels on pivoting bogeys 8 in x 4 in (20.3 cm x 10.2 cm) wide | Bristle: Polyethylene