2025 Vermeer® Pipeline Directional Drills D100x140 S3

Information

2025 Vermeer® Pipeline Directional Drills D100x140 S3

Equipped with angled, true open-top vises with an 8” (20.3 cm) opening, the D100x140 S3 offers operator visibility during rod makeup/breakout.

D100x140 S3 stackable rod box design allows additional rod to be loaded via the upper rod box.

Unique four-bar linkage and additional pads allow operators to set up entry angles of 11 to 24 degrees – increasing range attainable with tracks fully on ground.

True open-top design accommodates mud motors and other large tooling. Responsive and powerful clamping and breakout actions can boost cycle time efficiency.

Dual displays offer easy visibility to a wide range of machine performance, diagnostic and drilling information.

Unique four-bar linkage and additional pads allow operators to set up entry angles of 11 to 24 degrees – increasing range attainable with tracks fully on ground.

The D100x140 S3 is available with a wireless remote-controlled knuckle boom crane. At maximum reach of 19.5 ft (6 m), the crane has a rated capacity of 3,970 lb (1,800.8 kg).

Features may include:

  • Maximum rotary torque output of 14,000 ft-lb (18,981.5 Nm) and rotational speeds up to 203 rpm.
  • Select between 15-ft or 20-ft (4.6-m or 6.1-m) lengths of 3.5-in (8.9-cm)
  • Firestick® drill rod Dual displays for simpler operator use

Photos

Highlights

  • Blackshear, Georgia
  • 2025
  • Vermeer®
  • Pipeline Directional Drills D100x140 S3
  • Make and Model: CAT
  • Ultra low sulfur diesel
  • Available
  • (With Cab, Minimum Transport): 102 in
  • (With Cab): 138 in

Specifications

  • 2025
  • Vermeer®
  • Pipeline Directional Drills
  • D100x140 S3
  • Directional
  • Make and Model: CAT
  • Gross: 275 hp
  • Twin turbocharged
  • Maximum: 2200 rpm
  • Ultra low sulfur diesel
  • Maximum Operating Angle (Fore/Aft): 25 | Maximum Operating Angle (Left/Right): 25 | Pullback:100000 lbs |Thrust: 100000 lbs
  • Maximum Carriage Speed at Maximum Engine RPM: 175 ft/min | Maximum Spindle Torque (Low at Maximum Engine RPM): 14000 ft-lb | Maximum Spindle Torque (Medium at Maximum Engine RPM):10500 ft-lb | Maximum Spindle Torque (High at Maximum Engine RPM): 7000 ft-lb | Maximum Spindle Speed at Max Engine RPM: 215 rpm | Maximum Ground Drive Speed at Maximum Engine RPM: 2.8 mph
  • at Operator's Ear: 82 dB(a)
  • Angle of Approach: 18 deg | Rotation: 360 deg | Maximum Reach: 234 in | Minimum Bore Diameter: 6 in | Drill Rack Angle: 24 deg
  • (With Cab): 138 in
  • Minimum: 138 in
  • (With Cab, Minimum Transport): 102 in
  • Minimum (15 ft): 376.8 in | Minimum (20 ft): 436.8 in
  • Minimum: 102 in | With Cab, Minimum Transport : 102 in
  • tank: 80 gal | System: 120 gal
  • Max Fuel Consumption: 15 gph | Tank: 115 gal
  • Maximum Lifting Capacity: 5070 lbs | Maximum Lifting Capacity - Boom Extended/Max Reach: 3970 lbs
  • 15 ft: 50300 lbs | 20 ft: 52500 lbs | (Cab Option) - 15 ft: 49800 lbs | (Cab Option) - 20 ft: 57220 lbs
  • Automated Rod Loader: Semi-automated | Breakout System: Open top vise