Dixon Tractor Company

  • 3294 US-84
  • Blackshear, GA 31516
  • Call Us: (912) 449-6673
  • //www.dixontractor.com/
Print This Page

2025 Vermeer® Pipeline Directional Drills D220x500 S3

Information

2025 Vermeer® Pipeline Directional Drills D220x500 S3

Operators can adjust the drill from 30,000 ft-lb to 52,600 ft-lb (40,675 Nm to 71,316.1 Nm) of rotary torque, with max torque being highly advantageous when turning large-diameter reamers and hole openers for installing large-diameter product.

Full-length catwalk provides access to the entire length of the rack for ease of wire lining and assisting in the rod loading process.

Choose an excavator-style cab (cab on) for fast, compact setup and view of open-top vises, the rack and the rod loader or a stand-alone operator’s station that helps provide optimal operator comfort and room for the steering hand.

Both the cab and operator’s station include the same dual multifunction joystick controls found on all Vermeer S3 horizontal directional drills.

The high carriage speed aids in fast rod cycle time when adding or removing drill rods and helps cut down on cycle time when tripping out of the borehole.

Enhanced water course system features four 1.5-in (3.8-cm) mudlines and a 3-in (7.6-cm) head shaft, allowing high volumes of fluid to be pumped downhole.

Features may include:

  • Versatile enough for large-diameter water and utility installs in urban areas as well as challenging pipeline work
  • Reduce number of tool joint connections
  • Access up and down the rack with full-length catwalk
  • Powerful performance for the job

Photos

Highlights

  • Blackshear, Georgia
  • 2025
  • Vermeer®
  • Pipeline Directional Drills D220x500 S3
  • Ultra low sulfur diesel
  • Available

Specifications

  • 2025
  • Vermeer®
  • Pipeline Directional Drills
  • D220x500 S3
  • Directional
  • 415 hp
  • Turbo charged
  • Caterpillar C13 ACERT
  • Minimum Diameter: 6.1 in
  • Ultra low sulfur diesel
  • Max Consumption: 21.3 gph
  • Pullback: 240400 lbs | Thrust: 240400 lbs
  • Maximum Engine RPM: 2100 rpm | Idle Speed: 800 rpm | Rated RPM: 2000 rpm | Maximum Carriage at Maximum Engine RPM: 147 ft/min | Maximum Carriage in Low at Maximum Engine RPM: 42 ft/min | Maximum Spindle Torque (Low at Maximum Engine RPM): 52600 ft-lb | Maximum Spindle Torque (Medium at Maximum Engine RPM): 36200 ft-lb | Maximum Spindle Torque (High at Maximum Engine RPM): 16600 ft-lb | Maximum Spindle (Low at Maximum Engine RPM): 36 rpm | Maximum Spindle (Medium at Maximum Engine RPM): 53 rpm | Maximum Spindle at Max Engine RPM: 97 rpm | Maximum Ground Drive at Maximum Engine RPM: 1.9 mph
  • at Operator's Ear: 85 dB(A)
  • Angle of Approach: 17 deg | Rotation: 360 deg | Maximum Reach: 800.1 in | Maximum Operating Angle (Fore/Aft): 30 deg | Maximum Operating Angle (Left/Right): 30 deg | Drill Rack Angle: Minimum: 8.5 deg (14.9%), Maximum: 16 deg (28.7%)
  • Minimum: 609 in
  • Minimum: 100 in
  • Minumum: 138 in
  • Liquid
  • System: 166 gal (628.4 L)
  • Max Fuel Consumption: 20.8 gph (78.7 lph | Tank: 128 gal
  • Maximum Lifting Capacity: 4740 lbs | Maximum Lifting Capacity - Boom Extended/Max Reach: 2530 lbs
  • 88700 lbs
  • Breakout System: Semi-open top vise | EPA Certification Family: Tier 4 Final (EU Stage V) | Wireless Remote: Yes