2025 Vermeer® Brush Chippers BC1800XL

Information

2025 Vermeer® Brush Chippers BC1800XL

The BC1800XL is equipped with vertical feed roller technology to help aid in machine loading and the feeding of adverse materials.

Experience powerful yet efficient feeding thanks to the Origin® 6.2L gasoline powered engine.

The EcoIdle™ engine control system reduces engine speed to a preset lower rpm after one to five minutes of inactivity, saving fuel and reducing jobsite noise.

SmartFeed, a patented feed-sensing control system, boosts operator productivity and reduces engine strain by monitoring engine rpm and controlling feed rollers.

The patented bottom feed stop bar is strategically positioned so the operator can strike it to shut off the feed mechanism.

VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.

Features may include:

  • Built with strength for demanding conditions
  • Provides ability to feed with confidence
  • Performance ready for large takedowns

Photos

Highlights

  • Blackshear, Georgia
  • 2025
  • Vermeer®
  • Brush Chippers BC1800XL
  • Tongue Description: 4 x 4 x 0.375 / Extension: Two 12" Increments (for non winch)
  • Available
  • 78.5 in | Infeed Table: 67 in | drum: 26.2 in
  • 107 in | Infeed Hopper: 34 in | Chute: 110 in

Specifications

  • 2025
  • Vermeer®
  • Brush Chippers
  • BC1800XL
  • Brush
  • 28.4
  • Manufacturer: White RE470
  • Torflex
  • Electric
  • 950 cca
  • System Voltage: 12 | Switches: Control Panel: Ignition, throttle, Smartfeed, and ECOIdle. Rear: Lower feed bar sensitivity | Display: MFD | Shutdown System: High temp, low pressure | Radio Remote Control: Tree Commander
  • 70
  • 1100 | Feed: 117 ft/min
  • 124
  • System Type: open Center
  • Pump Flow at Maximum RPM: 6.3 gpm
  • System relief: 2850 psi | Auto Reverse: 2650 psi
  • 3544 cfm
  • Tongue Description: 4 x 4 x 0.375 / Extension: Two 12" Increments (for non winch)
  • 7" x 2.13" Channel
  • Pintle
  • Safety Lock - Number of Positions: 4 | Rotational Lock: Self Lock
  • Maximum Angle of Continuous Operation: 20 deg | Feed Roller Dimension: 23.5" x 18" | Feed Roller Dimension (Two): 23.5" x 18" | Infeed Throat Capacity: 20" x 24" | Distance from Feed Table to Ground: 30.5 in | Infeed Table Material Thickness: .2 in | Bottom Feed Stop Bar Diameter: 2 in | Bottom Feed Stop Bar Material Thickness: 11 GA | Normal Sensitivity: 22 deg / Reduced: 12 deg | Diameter: 2 in | Material Thickness: 11 in | Material Capacity: 19 in | Thickness: .5 in | Diameter: 36 in | Knife Thickness: .6 in | Knife Size: 0.625 x 5 x 10 | Bedknife Size: 3" x 20.25" | Bedknife Thickness: 1.3 in | Bottom Thickness: .1 in | Top Thickness: .2 in | Side Wall Thickness: .1 in | Deflector Thickness: .1 in | Chute Rotation Angle: 270 deg
  • Feed Table Up, Tongue In: 177 in | table Down, Tongue Extended: 231 in | Infeed Table: 36 in
  • 78.5 in | Infeed Table: 67 in | drum: 26.2 in
  • 107 in | Infeed Hopper: 34 in | Chute: 110 in
  • 18.7
  • Feed Roller Clamp Load: 380 lbs
  • Tank: 12 gal
  • Without winch and hydraulic jack: 8800 lbs | with winch, hydraulic jack and hydraulic chute: 9300 lbs | of Feed Roller: 116 lbs | With Shaft: 1160 lbs
  • Number of Feed Rollers: 2 | Feed Roller Clamp Type: Spring | Number of Feed Roller Motors: 2 | Reset Method: Green Hold to Run Button | Positions: 4: E-Stop, Forward, Neutral, Reverse | Useable Edges: 2 | Number of Paddles: 12 | Fixture Method: Weld on | Bedknife - Number of Useable Edges: 4 | Rotation Type: Worm gear with rotational lock | Filtration Method: 3 micron return, 100 micron suction | Fender Description: Integrated | Trailer Light Type: LED
  • Recommended: API | hydraulic Recommended: Vermeer VMF
  • A8 Modified Chipper Steel | Bedknife: 1018 CD
  • 11 | 4 | Number of Bolts/Knife: 5