2025 Vermeer® Brush Chippers BC700XL

Information

2025 Vermeer® Brush Chippers BC700XL

Easily move from jobsite to jobsite with the smallest member of the Vermeer brush chipper line.

A large infeed opening simplifies feeding irregular material and reduces the need for crosscuts before feeding the chipper.

SmartFeed, a patented feed-sensing control system, boosts operator productivity and reduces engine strain by monitoring engine rpm and controlling feed rollers.

The patented bottom feed stop bar is strategically positioned so the operator can strike it to shut off the feed mechanism in an emergency.

VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.

Features may include:

  • Move from jobsite to jobsite with ease
  • Maximum productivity while minimizing maintenance
  • Safety features designed with the operator in mind

Photos

Highlights

  • Blackshear, Georgia
  • 2025
  • Vermeer®
  • Brush Chippers BC700XL
  • Gasoline
  • Available
  • 71 in | Infeed Table: 41.2 in | 8 in
  • 102 in | Infeed Hopper: 22.1 in | Chute: 97.2 in

Specifications

  • 2025
  • Vermeer®
  • Brush Chippers
  • BC700XL
  • Brush
  • 1.5 in
  • 25 hp
  • 5000 cfm
  • Kohler ECH740
  • Kohler HD 2-Stage Dry
  • Flange-mounted ball type, self-aligning
  • 14
  • Manufacturer: White Hydraulics
  • Gasoline
  • 2000 lb/(907.2 kg) rubber torsion axle
  • Group 26, 400 CCA
  • System Voltage: 12 Volt
  • Feed: 49.4 ft/min | 1748 | Max Fuel Consumption: 2.4 gph
  • Spin-on
  • System Type: Open center
  • Pump Flow at Maximum RPM: 3.8 gpm
  • System relief pressure: 2500 psi
  • 3/16"/(.5 cm) ASTM A1011 steel
  • 2"/(5.1 cm) ball coupler
  • Feed Roller Minimum Distance to Drum: 4 in | Feed Roller Dimension: 10" Diameter | Infeed Throat Capacity: 6" x 8" (15.24 cm x 20.32 cm) | Pinch Point - Distance to End of Feed Table: 65.4 in | Distance from Feed Table to Ground: 28.1 in | Bottom Feed Stop Bar Diameter: 2 in | Bottom Feed Stop Bar Material Thickness: 12" (30.48 cm) | Diameter: 2 in | Material Thickness: .1 in | Material Capacity: 6 in | Thickness: 1.3 in | Diameter: 23.9 in | Knife Thickness: .6 in | Bedknife Size: 4" x 8.6"/(10.2 cm x 21.9 cm) hor; 4" x 5.8"/(10.2 cm x 14.6 cm) vert | Bottom Thickness: .1 in | Top Thickness: .1 in | Side Wall Thickness: .1 in | Deflector Thickness: .1 in | Chute Rotation Angle: 240 deg | Fender Description: .1"/(.3 cm) Steel bolt-on
  • Feed Table Up, Tongue In: 115 in / Table Down, Tongue Extended: 136 in | Infeed Table: 30.2 in
  • 71 in | Infeed Table: 41.2 in | 8 in
  • 102 in | Infeed Hopper: 22.1 in | Chute: 97.2 in
  • 6 gal
  • 6.8 gal
  • Feed Roller Clamp Load: 525 lbs
  • Feed Roller Orientation: Horizontal | Feed Roller Clamp Type: Spring/Feed Roller Weight | Reset Method: Dual green hold-to-run buttons | Positions: Four position: (E-Stop), Forward, Stop, (Reverse) | Fixture Method: Welded | Belt Idler/Tensioner: Spring-loaded adjustable Idler | Rotation Type: Manual | Filtration Method: Return flow filtration, 10 micron
  • 1800 lbs | Tongue option one: 180 lbs | Of Feed Roller: 100 lbs | With Shaft: 176 lbs
  • Recommended: Kohler oil or API CH4/SJ
  • A8 Chipper Steel | Bedknife: ASTM A572 Grade 50
  • 2-band 5-V profile Aramid