2025 Vermeer® Pedestrian Trenchers RTX200

Information

2025 Vermeer® Pedestrian Trenchers RTX200

The RTX200 features a 20.5-hp (15.3-kW) Kohler engine, delivering high-powered digging torque.

Promotes on-the-job safety with an operator presence system that disengages the trencher and ground drives if the operator leaves the controls, in addition to a trenching cleat that restricts backward motion.

The tandem effort of a heavy-duty hydraulic oil cooler and large reservoir help manage system temperature to enhance performance and reliability.

Thanks to the intuitive and enhanced VZ steering capabilities, the operator can navigate difficult and uneven terrains with ease.

Rubber tracks offer outstanding traction in soft, rocky or muddy conditions with minimal ground disturbance.

A 35-in (88.9-cm) width allows the RTX200 to access small spaces — including passing through typical backyard gates.

Features may include:

  • Designed with versatility for the next job
  • Keep your operators top-of mind with our enhanced operator presence system
  • Master your terrain with option of tire or tracks

Photos

Highlights

  • Blackshear, Georgia
  • 2025
  • Vermeer®
  • Pedestrian Trenchers RTX200
  • CH640
  • Gasoline
  • Available
  • (Over Rubber Tracks): 35 in | (Over Rubber Tires): 35 in | Tread with Rubber Tires (Centerline to Centerline): 8.5 in
  • 46 in

Specifications

  • 2025
  • Vermeer®
  • Pedestrian Trenchers
  • RTX200
  • Implement / Attachment
  • CH640
  • Kohler
  • 41.1 cu-in
  • Medium: Forced Air
  • Horsepower at Maximum RPM (Gross): 20.5 hp
  • Natural
  • Gasoline
  • Ground: Hydrostatic
  • Maximum Forward Transport Speed at Full Throttle: 3.1 mph | Maximum Reverse Transport Speed at Full Throttle: 1 mph
  • Attachment Pump Relief Pressure (Trencher/Forward): 2500 psi
  • Ground Drive Pump Relief Pressure Forward/Reverse: 2400 psi
  • Ground Drive Pump gpm at Maximum Engine RPM: 5.4 gpm | Attachment Pump gpm at Maximum Engine RPM: 10.3 gpm
  • Hydraulic Supply Filter Rating: 100 mesh strainer | Hydraulic Return Filter Rating: 3 micron
  • Maximum Operating Angle (Fore/Aft): 25 deg | Left/Right: 25 deg
  • 46 in
  • (Tractor with Tires): 83 in
  • From Centerline of Axles: 33.2 in
  • (Over Rubber Tracks): 35 in | (Over Rubber Tires): 35 in | Tread with Rubber Tires (Centerline to Centerline): 8.5 in
  • Engine: .5 gal
  • Tank: 2.5 gal
  • Tank: 10.8 gal | system: 11.3 gal
  • Tractor with Tires: 940 lbs