2024 Vermeer® Stump Cutters SC70TX

Information

2024 Vermeer® Stump Cutters SC70TX

The SC70TX can fit into tight spaces in a residential area. The track system is designed to decrease ground disturbance. The SC70TX is equipped with safety features such as the patented capacitance-sensing operator presence system and wheel brake to help you feel confident on the job.

Features may include:

Operator presence system

The operator presence system allows the cutter wheel to automatically stop when the operator releases the hydraulic cutter wheel controls.

Ground drive speed

The ground drive speed helps transport the machine between stumps to increase productivity on the job.

SmartSweep™ control system

The SmartSweep™ control system helps improve efficiency and productivity at the stump while helping to minimize wear and tear on the machine.

Gearbox drive cutter wheel system

Gearbox drive cutter wheel system directs the maximum amount of horsepower to the cutter wheel for optimal jobsite productivity.

Photos

Highlights

  • Blackshear, Georgia
  • 2024
  • Vermeer®
  • Stump Cutters SC70TX
  • CAT C2.2
  • Control Station Description: Swing-out | Operator Vision Shield Description: Abrasion-resistant coated polycarbonate
  • Ultra-low sulfur diesel
  • Available
  • 51 in
  • 72 in

Specifications

  • 2024
  • Vermeer®
  • Stump Cutters
  • SC70TX
  • Stump
  • CAT C2.2
  • Turbocharged
  • Tier 4 final/Stage V
  • Gross (Maximum): 67 hp
  • 153 ft-lb
  • Dry-type, restriction indicator, evacuator valve, safety element
  • Spin-on
  • Medium: Water/Antifreeze
  • Track Drive: Integral motor and planetary unit
  • Max Fuel Consumption: 3.8 gph
  • Ultra-low sulfur diesel
  • Electric clutch with brake
  • Upper: Straight bevel | Lower: Straight bevel
  • 2 universal joints | U Joints: Two standard with double lip seal
  • Spring-applied and hydraulically released dual parking brakes | Track: Integrated into motor/planetary unit
  • 950 CCA
  • 85A
  • System Voltage: 12 | Shutdown System: High engine temperature and low oil pressure
  • Cutterwheel: 948 rpm | High Speed Travel: 1.6 mph | Low Speed Travel: .7 mph
  • System Type: Tandem gear pump, pressure balanced | Filtration Method: Full-flow 4 micron return filter, suction strainer
  • Flow at Maximum RPM: 9 gpm
  • System relief pressure: 3000 psi | 2900 psi (200 bar)
  • Bearing - Soft Ground: 4.3 psi
  • Control Station Description: Swing-out | Operator Vision Shield Description: Abrasion-resistant coated polycarbonate
  • Track Frame Description: Tube and plate
  • Warning: Engine faults
  • Cutterwheel Diameter without Teeth: 23 in | Cutterwheel Thickness: Cutterwheel Thickness 1.1 in | Cutterwheel Straight Line Dimension: 65 in | Cutterwheel Cut Above Ground: 27 in | Cutterwheel Cut Below Ground: 16 in | Chip Containment: 23 cu ft
  • 141.6 in
  • 51 in
  • 72 in
  • 16.5 in (40.7 cm)
  • Retracted: 35 in | Extended: 51 in
  • On Ground: 51.2 in
  • Tank: 12 gal
  • Volume with Filter: 8.5 qt | 1.7 qt | Lower Gearbox: 2.2 qt
  • Coolant Capacity (Engine and Radiator): 2.9 gal
  • Tank: 9.6 gal
  • Engine Option One: 3900 lbs
  • Number of Teeth: 30 | Number of Indexes: 2 | Number of Pockets: 30 | Reversible Pockets: 30 | Controller: Vermeer C248 with SmartSweep | Display: Multifunction display (MFD); Displays - hours, fuel level, engine speed, engine faults and engine status | Number of Idlers: 10 | Sensor Type: Capacitive | Quantity/Location: 2 | Remote Display: LCD with remote control and machine functions status
  • Recommended: 10W-30 | SAE 75W90 synthetic gear oil | Lower Gearbox: SAE 75W90 synthetic gear oil | Recommended hydraulic: Vermeer Hypower 68
  • 9-in (22.9-cm) rubber iron core