2025 Vermeer® Brush Chippers AX17

Information

2025 Vermeer® Brush Chippers AX17

The AX17 delivers maximum pull-in force, making feeding of large-diameter logs and branchy limbs easier.

A fixed infeed table design and oversized infeed opening gives the operator optimal performance and durability when mechanically feeding.

With a weight under 10,000 lb (4536 kg), there's no need to have a CDL certified driver to transport this machine.

SmartFeed, a patented feed-sensing control system, boosts operator productivity and reduces engine strain by monitoring engine rpm and controlling feed rollers.

SmartCrush minimizes down pressure until the feed roller climbs onto the material, then increases pressure to push it to the cutter drum, allowing the operator to focus on the next load.

The EcoIdle™ engine control system reduces engine speed to a preset lower rpm after one to five minutes of inactivity, saving fuel and reducing jobsite noise.

Dual offset horizontal feed rollers lessen the need for the operator to manually control the machine when feeding large-diameter logs.

The patented winch boom design can be raised out of the way when mechanically feeding the machine.

VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.

The patented bottom feed stop bar is strategically positioned so the operator can strike it to shut off the feed mechanism.

Features may include:

  • Increase machine feeding efficiency on the job
  • Transport from job to job with ease
  • Optimize crew size for increased productivity

Photos

Highlights

  • Blackshear, Georgia
  • 2025
  • Vermeer®
  • Brush Chippers AX17
  • T4
  • Diesel
  • Available
  • 78.5 in | Infeed Table: 59.5 in
  • 110.5 in | Infeed Hopper: 29 in | Chute: 110.5 in

Specifications

  • 2025
  • Vermeer®
  • Brush Chippers
  • AX17
  • Brush
  • T4
  • Cummins
  • 3.8 L
  • 4
  • Gross Horsepower (Maximum): 130 hp
  • 360 ft-lb
  • 2-Stage Dry
  • Spin On
  • Medium: Liquid
  • of Feed Roller: (3) 2 upper, 1 lower | Displacement: 28.9 cu-in upper | Manufacturer: Parker
  • Max Fuel Consumption: 7 gph
  • Diesel
  • Type: Spring-loaded clutch | Engagement: Manual lever
  • Axle/Suspension: 10,000-lb torsion
  • 235/75R17.6
  • Option One: 17.5 x 6.75, bolt circle 8 on 6.6
  • electric
  • Group 31 - 950 CCA
  • 60 amp
  • 12 volt
  • Feed: 95 ft/min | 1800 rpm | Winch Input: 48 rpm
  • Actuation Force (BFSB): 34 lbs | Actuation Force: 34 lbs | Rope Line Pull: 2000 lbs
  • Sound Power: 116 dB(a)
  • System: Tandem center
  • Pump at Maximum RPM: 6 gpm
  • System relief pressure: 3000 psi | Auto Reverse PSI: 2800 psi | Winch Relief System: 1700 psi
  • Z Channel: .25-in (.64-cm) thickness
  • 3-in ID pintle
  • Trailer Type: LED
  • Maximum Angle of Continuous Operation: 45 deg | Feed Roller Minimum Distance to Drum: .4 in | Feed Roller Dimension: 15 in x 20 in (38.1 cm x 50.8 cm) | Feed Roller Dimension (Two): 11 in x 20 in (27.9 cm x 50.8 cm) | Infeed Throat Capacity: 19.5-in x 20.5-in (49.5-cm x 52.1-cm) | Distance from Feed Table to Ground: 30 in | Infeed Table Material Thickness: .3 in | Bottom Feed Stop Bar Diameter: 2 in | Bottom Feed Stop Bar Material Thickness: .12 in | Diameter: 2 in | Material Thickness: .1 in | Material Capacity: 17 in | Thickness: .5 in | Diameter: 26 in | Knife Thickness: .8 in | Knife Size: 5 in x 10 in (12.7 cm x 25.4 cm) | Bedknife Size: 3 in x 20.25 in (7.6 cm x 51.4 cm) | Bedknife Thickness: 1.3 in | Bedknife Material: 1018 | Bottom Thickness: .7 in | Top Thickness: .2 in | Side Wall Thickness: .1 in | Deflector Thickness: .1 in | Chute Rotation Angle: 270 deg | Rotation Type: Manual (hydraulic option) | Tongue Description: 3 in x 5 in x 38 in (7.6 cm x 12.7 cm x 96.5 cm) | Tongue Extension: Extendable, 12-in | Winch Boom Structure: .25 in (.64 cm), .19 in (.48 cm) | Winch Rope: 7/16 in
  • Feed Table Up, Tongue In: 210 in | Table Down, Tongue Extended: 222 in | Infeed Table: 52 in | Rope: 151 ft
  • 78.5 in | Infeed Table: 59.5 in
  • 110.5 in | Infeed Hopper: 29 in | Chute: 110.5 in
  • 22 in suction
  • 2.9 in
  • Tank: 40 gal | Tank: 3 gal
  • Volume with Filter: 13.6 qt
  • Feed Roller Orientation: Horizontal | Number of Feed Rollers: 2 | Feed Roller Clamp Type: Hydraulic | Reset Method: Green hold-to-run button | Positions: Four positions: E-stop, Forward, Neutral, Reverse | Safety Lock - Number of Positions: 2 | Useable Edges: 2 | Number of Bolts: 5 | Fixture Method: Weld On | Bedknife - Number of Useable Edges: 2 | Number of Bearings: 2 | Type: Spherical roller | Manufacturer: Linkbelt | Number of Bearings: 2 | Type: Spherical roller | Rotational Lock: Yes - self-locking worm gear | Filtration Method: 3 micron return, no suction | Gauges: MPC-12 | Switches: Hold-to-run, sensitivity selector, droop selector, EcoIdle™ engine control system, throttle, chute controls, remote enable, manual feed roller crush | Controller: MPC-12 | Display: MPC-12 | Radio Remote Control: Two options | Fender Description: Bolt-on steel | Type - Option One: Rubber torsional | Manufacturer - Option One: Dexter | Winch Controls: Forward, reverse and fee spool
  • Feed Roller Clamp: 3000 lbs
  • With winch, hydraulic jack and hydraulic chute: 9750 lbs | Engine Option One: 8640 lbs | Tongue - Engine Option One: 1380 lbs | of Feed Roller: 145 lbs | of Feed Roller (Option Two): 105 lbs | With Shaft: 855 lbs
  • Recommended: API CJ-4 or ACEA-E9 | Recommended: HY PWR 68
  • 9 | Number of: 2 | Number of: 5
  • A8 chipper steel
  • Number of: 12
  • 5V