2025 Vermeer® Brush Chippers AX19

Information

2025 Vermeer® Brush Chippers AX19

A fixed infeed table design and oversized infeed opening gives the operator optimal performance and durability when mechanically feeding.

The AX19 delivers maximum pull-in force, making feeding of large-diameter logs and branchy limbs easier.

The AX19 is built to handle large land-clearing operations and other tough jobs that require high feed capacity and throughput.

The EcoIdle™ engine control system reduces engine speed to a preset lower rpm after one to five minutes of inactivity, saving fuel and reducing jobsite noise.

SmartCrush minimizes down pressure until the feed roller climbs onto the material, then increases pressure to push it to the cutter drum, allowing the operator to focus on the next load.

Dual offset horizontal feed rollers lessen the need for the operator to manually control the machine when feeding large-diameter logs.

SmartFeed, a patented feed-sensing control system, boosts operator productivity and reduces engine strain by monitoring engine rpm and controlling feed rollers.

The winch operates with or without the easily removable boom. Removing the boom lets operators feed the chipper mechanically without interference.

The patented bottom feed stop bar is strategically positioned so the operator can strike it to shut off the feed mechanism.

VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.

Features may include:

  • Built with the performance needed for a variety of tough jobs
  • Enhanced productivity with mechanical feeding
  • Operator convenience to boost jobsite efficiency

Photos

Highlights

  • Blackshear, Georgia
  • 2025
  • Vermeer®
  • Brush Chippers AX19
  • Model: 4045HFC09
  • Tongue Description: 5" x 3" x 0.375" | Extension: Extendable 12"
  • Diesel
  • Available
  • 79 in | Infeed Table: 71 in | drum/disc: .5 in
  • 108 in | Infeed Hopper: 35 in | Chute: 108 in

Specifications

  • 2025
  • Vermeer®
  • Brush Chippers
  • AX19
  • Brush
  • Model: 4045HFC09
  • John Deere
  • Gross Horsepower (Maximum): 173 hp
  • 492 ft-lb
  • 2 Stage Dry
  • Spin-on
  • Medium: Liquid
  • 2.5 in
  • 28.4
  • Manufacturer: White RE470
  • Max Fuel Consumption: 6.8 gph
  • Diesel
  • 12" Spring Loaded | Drive Engagement: Manual Lever
  • Tandem Torsion 7000 lb capacity
  • Electric
  • 950 CCA
  • 90
  • System Voltage: 12
  • Feed: 119 ft/min | drum/disc: 1100
  • Actuation Force (BFSB): 34 lbs | Actuation Force: 34 lbs
  • System: Open Center
  • Pump Flow at Maximum RPM: 14.8 gpm
  • System relief: 3000 psi | Auto Reverse: 2800 psi
  • Tongue Description: 5" x 3" x 0.375" | Extension: Extendable 12"
  • 7.5" Z-Channel x 0.25" Thick
  • Pintle
  • Maximum Angle of Continuous Operation: 30 deg | Feed Roller Minimum Distance to Drum: 5 in | Feed Roller Dimension: 19" dia | Feed Roller Dimension (Two): 11" dia | Infeed Throat Capacity: 28.875" wide x 24" tall | Distance from Feed Table to Ground: 30.3 in | Infeed Table Material Thickness: .3 in | Bottom Feed Stop Bar Diameter: 2 in | Bottom Feed Stop Bar Material Thickness: 11 GA | Normal Sensitivity: 22 deg | Reduced Sensitivity: 12 deg | Diameter: 1.5 in | Material Thickness: 11 in | Material Capacity: 19 in | drum/disc Thickness: 26.1 in | drum/disc- Diameter: 36 in | Knife Thickness: Knife Thickness .6 in | Knife Size: Knife Size 0.625 x 5 x 10 | Bedknife Size: 3" x 20.25" | Bedknife Thickness: 1.3 in | Bottom Thickness: .1 in | Top Thickness: .2 in | Side Wall Thickness: .1 in | Deflector Thickness: .1 in | Chute Rotation Angle: 270 deg | Number of Cylinders: 4
  • Feed Table Up, Tongue In: 224 in | Table Down, Tongue Extended: 236 in
  • 79 in | Infeed Table: 71 in | drum/disc: .5 in
  • 108 in | Infeed Hopper: 35 in | Chute: 108 in
  • 26" Suction
  • 40 gal
  • Oil Volume with Filter: 15.5 qt
  • Feed Roller Orientation: Horizontal | Number of Feed Rollers: 2 | Feed Roller Clamp Type: Hydraulic | Number of Feed Roller Motors: 4 | Reset Method: Green Hold to Run Button | Positions: 4: E-Stop, Forward, Neutral, Reverse | Safety Lock - Number of Positions: 4 | Useable Edges: 2 | Number of Paddles: 12 | Fixture Method: Weld-on | Bedknife - Number of Useable Edges: 4 | Number of Bearings: 2 | Type: Spherical Roller | Manufacturer: Linkbelt | Belt Idler/Tensioner: Spring loaded | Rotation Type: Worm gear with rotational lock | Filtration Method: 6 micron return, 100 micron suction | Fender Description: Bolt-on
  • Feed Roller Clamp Load: 4000 lbs
  • Tank: 20 gal
  • Without winch and hydraulic jack: 11000 lbs | with winch, hydraulic jack and hydraulic chute: 11400 lbs | of Feed Roller: 350 lbs / Option Two: 186 lbs | With Shaft: 1160 lbs
  • Recommended Oil: ACEA E-7 & E-6 or API CI-4 | HY POWER 68
  • 12 | Number of Bolts/Knife: 5
  • Drum/disc: A8 Modified Chipper Steel | Bedknife: 1018 CD
  • 5V