2025 Vermeer® Brush Chippers BC1000XL Tier 4 Final

Information

2025 Vermeer® Brush Chippers BC1000XL Tier 4 Final

Designed for the modern where you are, the BC1000XL offers a choice of Tier 4 Final engines — 49 hp or 74 hp (36.4 kW or 55 kW) — that comply with emission regulations.

Spend less time maintaining with a clutchless PTO system that helps prevent premature wear on the belt drive by only allowing engagement at low idle.

The BC1000XL comes with a 25-gal (94.6-L) fuel tank that lets you put in more hours before refueling.

The EcoIdle™ engine control system reduces engine speed to a preset lower rpm after one to five minutes of inactivity, saving fuel and reducing jobsite noise.

SmartFeed, a patented feed-sensing control system, boosts operator productivity and reduces engine strain by monitoring engine rpm and controlling feed rollers.

The patented bottom feed stop bar is strategically positioned so the operator can strike it to shut off the feed mechanism.

VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.

Features may include:

  • Versatility where it matters most
  • Feed with machine intelligence for maximum productivity
  • Safety features designed with the operator in mind

Photos

Highlights

  • Blackshear, Georgia
  • 2025
  • Vermeer®
  • Brush Chippers BC1000XL Tier 4 Final
  • Tongue Description: 2.5" x 4.5" x .25" (6.4 cm x 11.4 cm x .6 cm) / Extension: Extendable 24" (61 cm) @ 12" (30.5 cm) increments
  • Diesel
  • Available
  • 66.5 in | Infeed Table: 52 in | 20 in | Infeed Throat Capacity: 17" (43.2 cm)
  • 101 in | Infeed Hopper: 12 in | Chute: 101 in | Infeed Throat Capacity: 12" (30.5 cm)

Specifications

  • 2025
  • Vermeer®
  • Brush Chippers
  • BC1000XL Tier 4 Final
  • Brush
  • Deutz
  • 28.3
  • Tier 4 Final
  • 4
  • Maximum: 74 hp
  • 181 ft-lb
  • 2.4 in
  • 2-stage dry with safety element
  • Spin-on
  • Medium: Liquid
  • Manufacturer: White
  • Max Fuel Consumption: 4.6 gph
  • Diesel
  • Clutchless PTO | Drive Engagement: Belt tensioner
  • Torsion
  • Group 31; 950 CCA
  • System Voltage: 12 Volt
  • 95 Amp
  • Feed: 105 ft/min | 2050 rpm
  • Actuation Force: 34 lbs
  • System Type: Tandem center
  • Pump Flow at Maximum RPM: 2.7 gpm
  • System relief: 2500 psi
  • Tongue Description: 2.5" x 4.5" x .25" (6.4 cm x 11.4 cm x .6 cm) / Extension: Extendable 24" (61 cm) @ 12" (30.5 cm) increments
  • 7" (17.78 cm) Z channel; 0.25" (0.64 cm) thickness
  • Pintle
  • Maximum Angle of Continuous Operation: 30 deg | Feed Roller Minimum Distance to Drum: 1 in | Feed Roller: 20" x 17" (50.8 cm x 43.2 cm) | Pinch Point - Distance to End of Feed Table: 66.5 in | Distance from Feed Table to Ground: 26 in | Infeed Table Material Thickness: .2 in | Bottom Feed Stop Bar Diameter: 2 in | Bottom Feed Stop Bar Material Thickness: 11 GA | Normal Sensitivity: 22 deg | Reduced Sensitivity: 12 deg | Material Capacity: 12 in | Thickness: .4 in | Diameter: 20 in | Knife Thickness: .6 in | Knife Size: 0.63" x 4.5" x 9" (1.6 cm x 11.4 cm x 22.9 cm) | Bedknife Size: 3.5" x 17.3" (8.9 cm x 43.8 cm) | Bedknife Thickness: 1 in | Chute Rotation Angle: 270 deg
  • Feed Table Up, Tongue In: 160 in | Table Down, Tongue Extended: 208 in | Infeed Table: 32 in
  • 66.5 in | Infeed Table: 52 in | 20 in | Infeed Throat Capacity: 17" (43.2 cm)
  • 101 in | Infeed Hopper: 12 in | Chute: 101 in | Infeed Throat Capacity: 12" (30.5 cm)
  • 18.625" (47.3 cm) suction
  • 25 gal
  • Volume with Filter: 8.4 qt
  • 13.3 gal
  • Feed Roller Orientation: Horizontal | Number of Feed Rollers: 1 | Number of Feed Roller Motors: 1 | Reset Method: Green hold-to-run button | Positions: 4: E-stop, forward, neutral and reverse | Safety Lock - Number of Positions: 2 | Useable Edges: 2 | Number of Paddles: 5 | Fixture Method: Weld-on | Bedknife - Number of Useable Edges: 4 | Number of Bearings: 2 | Type: Spherical rollers | Rotation Type: Rotation handle with pin lock | Filtration Method: 10 micron return; 100 micron suction
  • Feed Roller Clamp Load: 350 lbs | Static: 53500 lbs
  • 7 gal
  • Of Feed Roller: 400 lbs | With Shaft: 460 lbs
  • Recommended: 10W30 | Recommended: Vermeer VMF
  • A8 chipper steel | Bedknife: 1018 | Fender Description: Bolt-on-steel
  • 5V
  • 2 | Number of Bolts/Knife: 4