2025 Vermeer® Concrete Cutters CC155

Information

2025 Vermeer® Concrete Cutters CC155

SmartTEC performance monitoring assists operators with adjustments to machine controls to help improve efficiency and tracks the operational performance of the machine on a consistent platform across all machine models.

The compact design of the CC155 allows this machine to get the job done effectively and efficiently in metropolitan areas and tight roadways while limiting a lane closure.

The geometric design of the cutter wheel allows the cut to come from the center of the machine to give a more precise and powerful cut.

Features may include:

  • The Vermeer concrete cutter is a great choice for patch work and joint repair on interstates, streets and highways
  • With the sustained torque output of its Tier 4 Final (Stage IV) 156 hp (116 kW) John Deere® engine and SmartTEC performance software, the CC155 is a smart choice for road construction, interstate and highway repair, airport lighting projects and demolition work
  • Cutting streets for utility installation or patch work is no problem for the Vermeer CC155 concrete cutter. Its ground speed and compact design will help you get your project done efficiently while minimizing lane closures

Photos

Highlights

  • Blackshear, Georgia
  • 2025
  • Vermeer®
  • Concrete Cutters CC155
  • 4045
  • Available
  • 96 in | Tread: 79 in
  • 120 in

Specifications

  • 2025
  • Vermeer®
  • Concrete Cutters
  • CC155
  • Asphalt / Pavers / Concrete Equipment
  • 4045
  • 4
  • John Deere
  • Gross: 156 hp
  • Medium: Liquid
  • Dry type exhaust aspirated
  • Hydraulic Automotive | Ratio: 4 turns lock to lock
  • Ground Drive Motors: Dual-path hydrostatic with dual series flow to four low speed high torque motors
  • Spring-applied, hydraulic release
  • 32.3 x 16.5 - 12
  • Diameter: 84 in | Thickness: 2 in
  • System: 24 volt DC
  • Operating Range: 10.5 hours
  • Travel: 461 ft/min | Transport Maximum (High): 971 ft/min | Cutter Tip Speed (Low Gear): 1056 ft/min | Cutter Tip Speed (High Gear): 2113 ft/min
  • System: 5000 psi
  • 5 in
  • 165 in
  • 120 in
  • 216 in
  • 96 in | Tread: 79 in
  • Centerline of Axles: 97 in
  • Maximum Cutting: 31 " (78.74 cm)
  • 4.8 in | Option Two: 5 in | Option Three: 6.5 in | Option Four: 9 in | Option Five: 10 in
  • 88 gal
  • 74 gal
  • Cutting Teeth Type: Free-rotating, carbide tipped | Cutter Wheel Drive: Hydrostatic, one pump, one low speed high torque motor | Rock Cutter Segments: Bolt-on replaceable x 10 | Rock Cutter Teeth Quantity 5 " (12.7 cm) Cut: 110 | Rock Cutter Teeth Quantity 6.5 " (16.51 cm) Cut: 130 | Rock Cutter Teeth Quantity 9 " (22.86 cm) Cut: 150 | Rock Cutter Teeth Quantity 10 " (25.4 cm) Cut: 110
  • 26600 lbs |Tanks Empty: 24800 lbs
  • Vermeer HyPower 68 or Vermeer HyPower 100