2024 Vermeer® HG6000 Tier 4i

Information

2024 Vermeer® HG6000 Tier 4i

The HG6000 features a Cat C-rated C18 Tier 4 Final engine specifically chosen to meet the demands of your operation as well as those set by governmental regulations. It also comes with two adjustable screens – allowing you to mix and match screens to meet your end product needs for a variety of applications. So what exactly does this mean for you? Simply put, this system allows for more versatility on the jobsite meeting your end-product needs from mulch to biofuel markets all with one machine.

Features may include:

SmartGrind system

Increase productivity thanks to the exclusive Vermeer SmartGrind system, which automatically controls grinding speed based on engine rpm levels.

Series II duplex drum system

Improve cutting performance using the patented series II duplex drum system with reversible hammers and cutter blocks that simplify maintenance and nearly double wear life.

Single-piece discharge conveyor belt

Achieve better flow of material with our single-piece discharge conveyor belt.

Thrown object deflector (TOD)

Enhance jobsite safety with a TOD that reduces the quantity and distance of thrown debris.

Drum feature

Diversify your end product by incorporating the fuel chip attachment (FCA), allowing your grinder to be converted to a chipper.

Photos

Highlights

  • Blackshear, Georgia
  • 2024
  • Vermeer®
  • HG6000 Tier 4i
  • C18
  • Ultra-low sulfur diesel (<15 ppm)
  • Available
  • Feed Table: 60 in | Infeed Roller: 56.4 in | Millbox Opening: 60" | single belt: 48 in
  • Maximum Feed: 32 in | Millbox Opening: 32" | Load: 14 ft

Specifications

  • 2024
  • Vermeer®
  • HG6000
  • Tier 4i
  • Horizontal
  • C18
  • Caterpillar
  • Tier 4i
  • 6
  • Gross (Maximum): 755 hp
  • 2582 ft-lb
  • Dry-type with primary & secondary elements and restriction indicator
  • Full-flow, spin-on
  • Medium: Liquid
  • Max Fuel Consumption: 37.9 gph
  • Ultra-low sulfur diesel (<15 ppm)
  • Type: Leaf spring suspension
  • Hydraulic-operated wet clutch, PT Tech | Engagement: Push button
  • Radial piston motor | Drive Motor: Fixed displacement, Geroler | Planetary: Two options (HD - 26.18:1) (STD - 34.2:1)
  • Air-actuated with spring-applied parking brake
  • Group 8-D, 1155 CCA (Qty 2) | System Protection: Fused | AA (qty 6)
  • 24 V 95 A
  • Drum: 1086 rpm | Belt: 780 ft/min
  • Sound: 121 dB(A)
  • Filtration Method: Dual in-tank return filters (B5=200) | system: Open-loop, pressure- and flow-compensated | discharge conveyor system type: Open-loop / fan: Open-loop, pressure- and flow-compensated
  • Variable displacement, axial piston | discharge conveyor: Fixed displacement, gear pump / fan: Variable displacement, axial piston
  • Pump Flow at Maximum RPM: 32.4 | discharge conveyor Pump Flow at Maximum RPM:: 25.7 gpm / fan: 36.2 gpm
  • Pump Flow at Maximum RPM: 12.4 gpm
  • System Relief Pressure: 3000 / 4500 | System relief pressure: 260 psi
  • Fifth wheel
  • Trailer Type: 12-24V LED
  • Feed opening: 32-in (81.3-cm) high x 56.4-in (143.3-cm) wide | Infeed Roller Diameter: 36.1 in | Drum Diameter: 28 in | Tip Diameter: 36.4 in | Drum Skin Thickness: 1.5 in | Bearing - Inner Race Diameter: 5.5 in | Center Retention Pin Dimensions: 2" diameter x 75.3" L (5.1 cm diameter x 191.3 cm L) | Knife Thickness: .625 in (1.6 cm) | Shaft diameter: 6.5 in | Screen Dimensions: 3/4" (1.9 cm) thick | Screen Area: 3317 sq in | Liner Dimensions: 1" thick x 5.6" W x 65.4" L (2.5 cm thick x 14.2 cm W x 166.1 cm L) | Idler Roller Diameter: 12 in | Standard Drive Roller Diameter: 12.8 in | Magnetic Drive Roller Diameter: 12.8 in | Operating Range: Up to 300' (91.4 m)
  • Maximum: 38.8 ft
  • Maximum: 8.2 ft
  • Maximum: 13.1 ft
  • Feed Table: 60 in | Infeed Roller: 56.4 in | Millbox Opening: 60" | single belt: 48 in
  • Feed Table: 20 ft | Infeed Roller: 47.2 in | single belt: 81.3 ft
  • Maximum Feed: 32 in | Millbox Opening: 32" | Load: 14 ft
  • Adjustable: .125 in (.31 cm) to 1 in (2.5 cm)
  • Drum: 62.4 in
  • 350 gal
  • Oil Volume with Filter: 36 qt
  • Coolant Capacity (Engine and Radiator): 28.7 gal
  • 100 gal
  • Fan: Hydraulically-driven, reversible / CAC: Hydraulically-driven, reversible | Tooth Design: Serrated bars | Number of Teeth: 13 bars | Feed Roller Down Pressure: Adjustable | Bearing Type: Double row, spherical roller | Number of Hammers: 10 | Number of Tips: 20 | Tip types: Premium wide | Useable Edges: 1 | Number of Pockets: 14 | Shaft Retention Type: Keyless bushing | Number of Screens: 2 | Number of Sides: 1 | Return Roller Quantity: 4 | Idler Roller Bearing: 1-15/16, 4-bolt flange | Number of Coolers: 2 / clutch: 1 | clutch Filtration Method: Spin-on, pressure filter, B6 = 1000 | Display Type: LCD | Gauges: Two, fuel level and hydraulic pressure | Switches: Moisture-proof, toggle style / Sealed membrane | Radio remote type: R424 | Channel: Unit body construction Setting 50 channels | Number of Axles: 3
  • 65000 lbs | Tongue: 21000 lbs | Axle: 44000 lbs | Infeed roller with arm: 3350 lbs / 3483 lbs | Drum: 4741 lbs / 5946 lbs
  • API CJ-4, ECF-3 or API CK-4 Ultra Low Sulfur | hydraulic: Vermeer HyPower 68 | clutch Recommended: VMF Gold
  • Drive: Synchronous | single: 3 ply - 330# or straight warp single ply 330# both with V cleat
  • Flare: Integrated with infeed | Steel | Drive Roller: Welded steel | Front Idler Roller: Self-cleaning steel auger | Infeed Floor: Welded steel with replaceable UHMW wear plates | Fabricated steel | chipper drum: A8 mod chipper steel | Screen Type: Fabricated out of abrasion-resistant steel | Millbox lid liner: Abrasion-resistant steel | Millbox Lid Liner Dimensions: Abrasion resistant steel | Anvil Type: Fabricated steel with replaceable wear surfaces | Splice: R2-stainless steel or Super splice
  • Feed: Welded slat chain
  • 28 | Number of Bolts/Knife: 2