2024 Vermeer® LS3600TX Base

Information

2024 Vermeer® LS3600TX

The single-shaft LS3600TX is the first low speed shredder from Vermeer, featuring exclusive innovations that efficiently process contaminated waste streams and help protect critical machine components. Unparalleled access to the rotor, comb and engine compartment addresses long-time industry maintenance issues.

Features may include:

Full rotor access

The hydraulically operated side door provides full exposure to the rotor, comb and belly conveyor to minimize maintenance time. The service area has been designed to allow you to perform maintenance without overhead obstructions.

Full-function remote

Adjust machine functions, capture machine data and diagnose equipment fault codes — all from the full-function remote. You can spend more time in the cab throughout the day, monitor machine health and make real-time adjustments remotely, allowing you to keep things running efficiently.

Double-ended comb teeth

The LS3600TX has individual bolt-in comb teeth that have two usable edges. This helps extend the life of your teeth and minimize wear costs.

Engine bay access

The LS3600TX gives you unparalleled access to the machine. The maintenance-friendly and highly accessible engine bay design includes large access doors, multiple ladder points and a large service platform to help with ease of maintenance and serviceability.

Mechanical driveline and protection

Equipped with a reversable mechanical transmission for an efficient power transfer that maximizes productivity. A torque limiter automatically disengages the drive when max torque is experienced — helping protect critical machine components.

Serviceable belly conveyor

The belly conveyor can be removed without detaching the discharge conveyor — allowing for minimally invasive service.

Photos

Highlights

  • Blackshear, Georgia
  • 2024
  • Vermeer®
  • LS3600TX Base
  • C13B
  • Reversing dual clutch
  • Ultra-low sulfur diesel (<15 ppm)
  • Available
  • Feed opening: 88-in (225-cm) | Belly Conveyor System: 41 in | Discharge Conveyor System: 48 in
  • Loading: 10.5 ft | Discharge Conveyor System - Load: 8 ft - 14 ft (2.43 m - 4.3 m)

Specifications

  • 2024
  • Vermeer®
  • LS3600TX
  • Base
  • General
  • C13B
  • CAT
  • T4F/Stage V
  • 6
  • Gross (Maximum): 456 hp
  • (Maximum): 2082 ft-lb | Limiter: Ball detent
  • Dry-type with primary and secondary elements and restriction indicator
  • Full-flow, spin-on
  • Medium: Liquid (Nitrite-free, pre-diluted 50/50)
  • Belly Conveyor System - Drive: Fixed displacement | Discharge Conveyor System - Drive: Fixed displacement | Belly Conveyor: Orbital | Fan Drive: Series 40 - axial piston | Track Drive: Bent axis piston
  • Max Fuel Consumption: 19.3 gph
  • Ultra-low sulfur diesel (<15 ppm)
  • Reversing dual clutch
  • Single caliper disk | Track: Hydraulic release
  • 8D-MHD, 1,400 CCA (qty. 2) | Radio Remote Control: AA (qty. 6)
  • 24 V, 150 A
  • 24 V | System Protection: Fused
  • Rotor: 30 rpm | Tip: 310 ft/min | Belly Conveyor System - Belt: 784 ft/min | Discharge Conveyor System - Belt: 824 ft/min | Track Max high: 1.7 mph | Track Low Travel: 1.2 mph
  • 112.9 db(A)
  • Implement - Components: Nine section | Implement - System: Open loop | Belly Conveyor - System: Closed loop | Discharge Conveyor- System: Closed loop | Fan Drive - System: Closed loop
  • Implement: 23/8 CC tandem | Belly Conveyor: Variable piston | Discharge Conveyor: Variable piston | Fan Drive: Variable piston | Track Drive Pump Type: Closed loop
  • Implement - Flow at Maximum rpm: 12.7 gpm/4.4 gpm (61.9 L/min / 16.6 L/min) | Belly Conveyor - Flow at Maximum RPM 32.5 gpm | Discharge Conveyor - Flow at Maximum rpm: 32.5 gpm | Fan Drive - Flow at Maximum rpm: 16.3 gpm | Track Flow at Maximum rpm: 29.4 gpm
  • Implement - System relief: 2900 psi | Belly Conveyor - System: 3336 psi | Discharge Conveyor - System: 3336 psi | Fan Drive - System relief: 3626 psi | Tracks System relief: 4061 psi | Track Width Option One - Ground Bearing Pressure - Soft Ground: 15.4 psi
  • Unit body construction
  • Air to boil temperature: 134° F (56° C) | Tip Diameter: 39.5 in | Short tip diameter: 36.8 in | Rotor skin thickness: 1.3 in | Wear Plate Thickness: .5 in | Belly Conveyor System - Drive pulley diameter: 9 in | Belly Conveyor System - Tail pulley diameter: 9 in | Discharge Conveyor System - Tail pulley diameter: 12 in | Discharge Conveyor System - Drive pulley diameter: 12.8 in | Radio Remote Control - Operating Range
  • Maximum: 28 ft
  • Maximum - working: 47.3 ft | Infeed hopper (with extension): 145.8 in | Hopper extension: 67 in | Feed opening: 145.75-in (370-cm) | Belly Conveyor System: 12.8 ft | Discharge Conveyor System: 22.3 ft
  • Maximum: 8.3 ft
  • Maximum: 11.5 ft
  • Infeed: 86 in
  • Infeed hopper: 44 in | Hopper extension: 3 in
  • Loading: 10.5 ft | Discharge Conveyor System - Load: 8 ft - 14 ft (2.43 m - 4.3 m)
  • extension: 18 in | extension loading: 11.2 ft
  • Feed opening: 88-in (225-cm) | Belly Conveyor System: 41 in | Discharge Conveyor System: 48 in
  • 24.5 in
  • 10.1 ft
  • axle to idler-sprocket: 10.86 ft (3.31 m)
  • Option One: 17.7 in (45 cm)
  • Tank: 146 gal | Diesel exhaust fluid capacity: 17.3 gal
  • Volume with Filter: 45 qt
  • Fan: Multi-wing (variable pitch) | Fan - CAC: Electric (variable speed) | Planetary type: Gearbox | Number of mounts: 21 | Number of Tips: 21 | Tip types: Tall/short | Belly Conveyor System Splice: Continuous | Discharge Conveyor System - Return Roller Quantity: 2 | Hydraulic System - Filtration Method: Dual in-tank return filters | Number of Coolers: 1 | Implement Hydraulics - Components: Nine section | Fan Drive - Fan type (FWD/REV): Multi-wing (variable pitch) | Control Station - Display Type: LCD touchscreen | Control Station - Switches: Sealed membrane CAN bus keypad | Radio Remote Control - Display Type: LCD | Radio Remote Control - Switches Sealed membrane | Radio Remote Control - Channel Setting: 50 channels | Track Type: N.1 FL6 triple grouser / Type: of Idler FL6 track roller | Number of Idlers: 9
  • Infeed: 10.2 cu yd
  • Hydraulic System - Tank: 40 gal
  • Maximum: 71650 lbs | Rotor: 5700 lbs
  • Recommended: API CJ-4, 15W-40 | Hydraulic System - Recommended: Vermeer HyPower 68
  • Belly Conveyor System Design: 1-ply — 330# with V-cleat — steel mesh | Discharge Conveyor System - Design: 3-ply — 330# with V-cleat
  • Hopper extension: Integrated steel with hydraulic cylinder | Discharge Conveyor System - Splice: R2 stainless steel cable