2020 Sukup Spredway Power Sweep 8"

2020 Sukup Spredway Power Sweep 8"

A grain spreader helps distribute grain in the bin and helps eliminate fines build-up in center of the bin. No gearbox and a minimum of moving parts make Spredway® the most dependable grain spreader you can buy.

Features may include:

• Simple design includes a machined pulley to ensure the drive belt remains in position under the heaviest grain flow conditions

• Permanently lubricated bearings eliminate need to climb bin to grease bearings and oil gears

• All Sukup Spredways® are equipped with heavy-duty, high-horsepower motors to ensure optimum performance

• TEFC motors mount outside of spreader cone so they do not obstruct grain flow or overheat from hot grain flowing over them

• The spreader cone on Sukup standard and Hi-Cap Spredways is made from galvanized steel for long life

• There are no motors or gearboxes inside the spreader funnel to hamper grain flow

• The angle of the spreader pan can be easily adjusted from the top to control the grain distribution pattern

• The handle is easily accessible, unlike other spreaders that must be adjusted from below the unit or with a special tool

• Adjusting the pan matches the grain spread distance to different bin diameters

• A split spreader pan (standard) divides the grain discharge, resulting in a more evenly balanced flow and making the spreader operate more smoothly

• Two-piece mounting brackets allow for vertical and horizontal adjustment to level the spreader

• Rigid mount prevents spreader movement during operation

• Additional hanger brackets are available for mounting in bins that are not compatible with the rigid brackets

• Sukup has developed a new pre-spread device for grain spreaders. Sukup’s exclusive Pre-Spread Ring (U.S. Patent #8,123,452) is less costly, optimizes the uniform distribution of the grain from a spreader, attaches to the spreader more securely, and does not interfere with closing the bin lid.

• Pre-Spread Ring sits inside the spreader cone

• The ring helps guide grain toward the center of the spreader to provide more uniform distribution of the grain

• The diameter of the opening can be changed to match different sizes of augers. Laser-cut knockout sections can be taken off and reinserted depending upon the size of auger being used.

• Pre-Spread Ring is standard on all Sukup Spredway Grain Spreaders

• Fits 33'-48’ diameter bins

• 3,000-5,000 BPH capacity

• ¾ HP motor

• 5,000 – 7,000 BPH capacity

• Fits 36’ to 60’

• 1-½ HP motor