2025 Vermeer® Trailed Mowers TM1200

2025 Vermeer® Trailed Mowers TM1200

Swipe to View More

  • Year 2025
  • Make Vermeer®
  • Model Trailed Mowers
2025 Vermeer® Trailed Mowers TM1200

2025 Vermeer® Trailed Mowers TM1200

2025 Vermeer® Trailed Mowers TM1200

Cutter bars are staggered and overlap for complete cutting action down the middle.

Help reduce labor and fuel by using one wide swath mower to cut more acres than multiple 3-point mowers.

Help protect your cutter bar and your field. The suspension system complements the independent cutter bars, allowing each to contour the ground and operate at different levels.

Float over fields and contoured terrain with a nitrogen-charged accumulator flotation system that adjusts for varying field and crop conditions.

Get more protection from unseen obstacles with the wide skid shoes and suspension system that help protect the cutter bars and the friction clutch, which protects the drive system.

Gain easy access to the cutter bars with flip-up curtains.

Replace blades in seconds using the exclusive Quick-Clip® blade retention system.

Minimize maintenance with 12 self-contained discs, each with their own set of gears, bearings and lubricants. Gears stay in the grease — even when mowing at extreme angles.

Features may include:

  • Wide cutting width, narrow transport width
  • Complete, consistent cutting action
  • Minimized, convenient maintenance

Engine

Engine Power Recommended: 85 hp

PTO

PTO Power, Rated Engine Speed 540 or 1000 rpm

Drivetrain

Driveline Torque protection: friction disc clutch

Suspension

Suspension Hydraulic

Wheels & Tires

Tires, Rear Specification 31x13.5-15

Operational

Operating Speed Disc: 2950 rpm

Hydraulics

Hydraulic Flow Rate: 6 gpm
Maximum Pressure Hydraulic: 1500 psi
Hydraulic Type 2 double-acting

Chassis

Hitch/Type 2-point with swivel gearbox, category II or III N

Dimensions

Width, Working Position 22 ft
Transport Length 22 ft
Transport Height 78 in
Cutting Width 15.5 ft
Length Working: 18 ft
Lift Height Cutter bar clearance: 16 in
Height Working: 78 in | Cut: 1.3 in - 3 in (3.2 cm - 7.6 cm)
Dimensions Mower swung out offset: 50 in | Number of Discs: 12 | Disc Diameter: 19.7 in | Number of Blades: 24 | Curtain material: 1400 g/m2 polyester woven material with flexible PVC covering

Weights

Weight Total: 5900 lbs | Tongue: 1580 lbs

Features

Features Angle Adjustment: Hydraulic pitch control

Product Photography