2025 Vermeer® Pipeline Directional Drills D1000x900

2025 Vermeer® Pipeline Directional Drills D1000x900

Swipe to View More

  • Year 2025
  • Make Vermeer®
  • Model Pipeline Directional Drills
2025 Vermeer® Pipeline Directional Drills D1000x900

2025 Vermeer® Pipeline Directional Drills D1000x900

2025 Vermeer® Pipeline Directional Drills D1000x900

High-torque, low-speed Hagglunds® hydraulic motors efficiently powers rotary and carriage drives so you can run full torque and full rotary rpm simultaneously.

Muscles through difficult ground formations with higher torque than other predecessors.

Thrust box bearing-pack assembly reduces stress on the motor by absorbing the axial load caused by thrust and pullback.

Floating vise helps prevent rod wrap or windup because it allows the breakout system to clamp the full rod upsets during breakout of the lower and upper joints.

Features may include:

  • Muscle for the biggest of drilling jobs
  • Run full torque and full rotary rpm simultaneously
  • Rugged design for real-world rigors

Engine

Engine Manufacturer (1) CAT C-27
Engine Power Gross: 800 hp
Engine Torque Maximum: 2000 rpm

Fuel Usage

Fuel Type Diesel

Suspension

Suspension Triple axle with air ride suspension

Operational

Operating Conditions Thrust: 1000000 lbs | Pullback: 1000000 lbs | Maximum Spindle Torque: 102500 ft-lb
Operating Speed Maximum Spindle Torque (Low at Maximum Engine RPM): 102500 ft-lb | Maximum Spindle Speed at Maximum Engine RPM (with PS800): 36 rpm |Maximum Spindle Speed at Maximum Engine RPM (with PS1200/PS1600): 54 rpm |Maximum Carriage Speed at Maximum Engine RPM: 77 ft/min

Dimensions

Transport Length Minimum: 50.5 ft
Transport Height Minimum: 11.5 ft
Width 8.5 ft | Front Base Anchor: 6 ft | Front Flat AnchoR: 5 ft | Rear Base Anchor : 7.8 ft | Cabin: 8.5 ft | Power Pack: 8 ft
Length Front Base Anchor: 20 ft | Front Flat Anchor: 9.5 ft | Rear Base Anchor: 16 ft | Cabin: 10 ft | Power Pack: 22.4 ft
Height Front Base Anchor: 24 in | Front Flat Anchor: 8 in | Rear Base Anchor: 8 in | Cabin: 9 ft | Power Pack: 10.3 ft
Dimensions Number of Rear Legs: 2 | Drill Rack Angle: 8 degrees to 12 degrees | Number of Rotation Motors: 1 | Number of Drive Motors: 4 | Mud Swivel: 3 in | Lower Travel: 6 ft | Lower Inside Diameter: 9.8 in | Lower Breakout Force: 253000 ft-lb | Lower Configuration: 3-jaw clamp, 8 " (20.3 cm) | Upper Breakout Force: 250000 ft-lb | Upper Configuration: 2-jaw clamp | Upper Inside Diameter: 10 in

Capacities

Fuel Capacity Tank: 500 gal
Hydraulic Capacity Tank: 720 gal

Weights

Weight 101000 lbs | Cabin: 6000 lbs | Power Pack: 38000 lbs | Breakout Vise: 3800 lbs

Features

Features Heat and Air Conditioning: In-wall combination unit | Remote Lockout: Yes | Strike Alert: Yes | EPA Certification Family: Tier 2 (EU Stage II)

Product Photography