2025 Vermeer® Pipeline Directional Drills D220x500 S3

2025 Vermeer® Pipeline Directional Drills D220x500 S3

Swipe to View More

  • Year 2025
  • Make Vermeer®
  • Model Pipeline Directional Drills
2025 Vermeer® Pipeline Directional Drills D220x500 S3

2025 Vermeer® Pipeline Directional Drills D220x500 S3

2025 Vermeer® Pipeline Directional Drills D220x500 S3

Operators can adjust the drill from 30,000 ft-lb to 52,600 ft-lb (40,675 Nm to 71,316.1 Nm) of rotary torque, with max torque being highly advantageous when turning large-diameter reamers and hole openers for installing large-diameter product.

Full-length catwalk provides access to the entire length of the rack for ease of wire lining and assisting in the rod loading process.

Choose an excavator-style cab (cab on) for fast, compact setup and view of open-top vises, the rack and the rod loader or a stand-alone operator’s station that helps provide optimal operator comfort and room for the steering hand.

Both the cab and operator’s station include the same dual multifunction joystick controls found on all Vermeer S3 horizontal directional drills.

The high carriage speed aids in fast rod cycle time when adding or removing drill rods and helps cut down on cycle time when tripping out of the borehole.

Enhanced water course system features four 1.5-in (3.8-cm) mudlines and a 3-in (7.6-cm) head shaft, allowing high volumes of fluid to be pumped downhole.

Features may include:

  • Versatile enough for large-diameter water and utility installs in urban areas as well as challenging pipeline work
  • Reduce number of tool joint connections
  • Access up and down the rack with full-length catwalk
  • Powerful performance for the job

Engine

Engine Power 415 hp
Aspiration Turbo charged
Engine Manufacturer Caterpillar C13 ACERT
Bore Minimum Diameter: 6.1 in

Fuel Usage

Fuel Type Ultra low sulfur diesel
Fuel System Max Consumption: 21.3 gph

Operational

Operating Conditions Pullback: 240400 lbs | Thrust: 240400 lbs
Operating Speed Maximum Engine RPM: 2100 rpm | Idle Speed: 800 rpm | Rated RPM: 2000 rpm | Maximum Carriage at Maximum Engine RPM: 147 ft/min | Maximum Carriage in Low at Maximum Engine RPM: 42 ft/min | Maximum Spindle Torque (Low at Maximum Engine RPM): 52600 ft-lb | Maximum Spindle Torque (Medium at Maximum Engine RPM): 36200 ft-lb | Maximum Spindle Torque (High at Maximum Engine RPM): 16600 ft-lb | Maximum Spindle (Low at Maximum Engine RPM): 36 rpm | Maximum Spindle (Medium at Maximum Engine RPM): 53 rpm | Maximum Spindle at Max Engine RPM: 97 rpm | Maximum Ground Drive at Maximum Engine RPM: 1.9 mph

Performance

Noise Level at Operator's Ear: 85 dB(A)

Dimensions

Transport Length Minimum: 609 in
Transport Width Minimum: 100 in
Transport Height Minumum: 138 in
Dimensions Angle of Approach: 17 deg | Rotation: 360 deg | Maximum Reach: 800.1 in | Maximum Operating Angle (Fore/Aft): 30 deg | Maximum Operating Angle (Left/Right): 30 deg | Drill Rack Angle: Minimum: 8.5 deg (14.9%), Maximum: 16 deg (28.7%)

Capacities

Cooling System Liquid
Hydraulic Capacity System: 166 gal (628.4 L)
Fuel Capacity Max Fuel Consumption: 20.8 gph (78.7 lph | Tank: 128 gal
Hitch Lift Capacity Maximum Lifting Capacity: 4740 lbs | Maximum Lifting Capacity - Boom Extended/Max Reach: 2530 lbs

Weights

Weight 88700 lbs

Features

Features Breakout System: Semi-open top vise | EPA Certification Family: Tier 4 Final (EU Stage V) | Wireless Remote: Yes

Product Photography