Current Vermeer® Rental Brush Chippers

2025 Vermeer® Brush Chippers BC1000XL Tier 4 Final

2025 Vermeer® Brush Chippers BC1000XL Tier 4 Final

Swipe to View More

  • Year 2025
  • Make Vermeer®
  • Model Brush Chippers
Shop Vermeer® Pre-Owned
Product Details Specifications Photos
2025 Vermeer® Brush Chippers BC1000XL Tier 4 Final

2025 Vermeer® Brush Chippers BC1000XL Tier 4 Final

  • Year 2025
  • Manufacturer Vermeer®
  • Model Name Brush Chippers
  • Trim Name BC1000XL Tier 4 Final
  • Generic Type (Primary) Brush
  • Engine Manufacturer Deutz
  • Displacement D2.9L
  • Emissions Tier 4 Final
  • Cylinder Liners 4
  • Engine Power Maximum: 74 hp
  • Engine Torque, Maximum 181 ft-lb
  • Bore 2.4 in
  • Air Cleaner 2-stage dry with safety element
  • Oil Filter Spin-on
  • Cooling Medium: Liquid

2025 Vermeer® Brush Chippers BC1000XL Tier 4 Final

Designed for the modern where you are, the BC1000XL offers a choice of Tier 4 Final engines — 49 hp or 74 hp (36.4 kW or 55 kW) — that comply with emission regulations.

Spend less time maintaining with a clutchless PTO system that helps prevent premature wear on the belt drive by only allowing engagement at low idle.

The BC1000XL comes with a 25-gal (94.6-L) fuel tank that lets you put in more hours before refueling.

The EcoIdle™ engine control system reduces engine speed to a preset lower rpm after one to five minutes of inactivity, saving fuel and reducing jobsite noise.

SmartFeed, a patented feed-sensing control system, boosts operator productivity and reduces engine strain by monitoring engine rpm and controlling feed rollers.

The patented bottom feed stop bar is strategically positioned so the operator can strike it to shut off the feed mechanism.

VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.

Features may include:

  • Versatility where it matters most
  • Feed with machine intelligence for maximum productivity
  • Safety features designed with the operator in mind

Engine

Engine Manufacturer Deutz
Displacement D2.9L
Emissions Tier 4 Final
Cylinder Liners 4
Engine Power Maximum: 74 hp
Engine Torque, Maximum 181 ft-lb
Bore 2.4 in
Air Cleaner 2-stage dry with safety element
Oil Filter Spin-on
Cooling Medium: Liquid

Motor

Displacement 28.3
Motor Type Manufacturer: White

Fuel System

Fuel System Max Fuel Consumption: 4.6 gph
Fuel Type Diesel

Drivetrain

Clutch Clutchless PTO | Drive Engagement: Belt tensioner

Suspension

Suspension Torsion

Battery

Battery Group 31; 950 CCA

Electric

Electrical System Voltage: 12 Volt
Alternator 95 Amp

Operational

Operating Speed Feed: 105 ft/min | 2050 rpm
Operating Conditions Actuation Force: 34 lbs

Hydraulics

Hydraulic Type System Type: Tandem center
Hydraulic Pump Pump Flow at Maximum RPM: 2.7 gpm
Maximum Pressure System relief: 2500 psi

Chassis

Chassis Tongue Description: 2.5" x 4.5" x .25" (6.4 cm x 11.4 cm x .6 cm) / Extension: Extendable 24" (61 cm) @ 12" (30.5 cm) increments
Frame Type 7" (17.78 cm) Z channel; 0.25" (0.64 cm) thickness
Hitch/Type Pintle

Dimensions

Dimensions Maximum Angle of Continuous Operation: 30 deg | Feed Roller Minimum Distance to Drum: 1 in | Feed Roller: 20" x 17" (50.8 cm x 43.2 cm) | Pinch Point - Distance to End of Feed Table: 66.5 in | Distance from Feed Table to Ground: 26 in | Infeed Table Material Thickness: .2 in | Bottom Feed Stop Bar Diameter: 2 in | Bottom Feed Stop Bar Material Thickness: 11 GA | Normal Sensitivity: 22 deg | Reduced Sensitivity: 12 deg | Material Capacity: 12 in | Thickness: .4 in | Diameter: 20 in | Knife Thickness: .6 in | Knife Size: 0.63" x 4.5" x 9" (1.6 cm x 11.4 cm x 22.9 cm) | Bedknife Size: 3.5" x 17.3" (8.9 cm x 43.8 cm) | Bedknife Thickness: 1 in | Chute Rotation Angle: 270 deg
Length Feed Table Up, Tongue In: 160 in | Table Down, Tongue Extended: 208 in | Infeed Table: 32 in
Width 66.5 in | Infeed Table: 52 in | 20 in | Infeed Throat Capacity: 17" (43.2 cm)
Height 101 in | Infeed Hopper: 12 in | Chute: 101 in | Infeed Throat Capacity: 12" (30.5 cm)
Fan Diameter 18.625" (47.3 cm) suction

Capacities

Fuel Capacity 25 gal
Oil capacity Volume with Filter: 8.4 qt
Cooling System 13.3 gal
Features Dynamic: 31400 lbs
Load Capacity, Land Feed Roller Clamp Load: 350 lbs | Static: 53500 lbs
Hydraulic Capacity 7 gal

Weights

Weight Of Feed Roller: 400 lbs | With Shaft: 460 lbs

Features

Features Feed Roller Orientation: Horizontal | Number of Feed Rollers: 1 | Number of Feed Roller Motors: 1 | Reset Method: Green hold-to-run button | Positions: 4: E-stop, forward, neutral and reverse | Safety Lock - Number of Positions: 2 | Useable Edges: 2 | Number of Paddles: 5 | Fixture Method: Weld-on | Bedknife - Number of Useable Edges: 4 | Number of Bearings: 2 | Type: Spherical rollers | Rotation Type: Rotation handle with pin lock | Filtration Method: 10 micron return; 100 micron suction
Oil Type Recommended: 10W30 | Recommended: Vermeer VMF
Construction Material A8 chipper steel | Bedknife: 1018 | Fender Description: Bolt-on-steel
Belt Type 5V
Knife Quantity 2 | Number of Bolts/Knife: 4

Product Photography