2025 Vermeer® Surface Miners T1155III
- Year 2025
- Make Vermeer®
- Model Surface Miners
2025 Vermeer® Surface Miners T1155III
2025 Vermeer® Surface Miners T1155III
SmartTEC performance monitoring assists operators with adjustments to machine controls to help improve efficiency and tracks the operational performance of the machine on a consistent platform across all machine models.
The elevating rollover protective module cab features LEXAN glass, filtered and pressurized air, heating and air-conditioning. The cab’s vantage point allows an optimal view of the boom, trench and conveyor.
A rotary power trencher drive motor and splined headshaft produce a low speed and high torque which provide maximum ground penetration and low chain wear for optimal production results.
Features may include:
- Ideal for large rock excavation applications including surface mining, overburden removal, site preparation and road demolition
- The T1155III surface miner is equipped with a Caterpillar® C15 ACERT Tier 3 or Tier 4 Final electronic engine, giving you the power needed to level surfaces on your construction or mining site
- Pair this with a top-down cutting system to achieve greater rock penetration
- Conduct surface mining extraction, remove ground surface, or create a smooth, level area for construction site preparation
Engine
Cylinder Liners
6
Rated Engine Speed
2100 rpm
Engine Power
Gross: 540 hp
Cooling
Medium: Liquid
Air Cleaner
Dry-type with pre-cleaner
Engine Manufacturer
Caterpillar C15 ACERT Tier 3
Aspiration
Turbocharged and air-to-air aftercooled
Electric
Electrical
24 Volt DC
Operational
Operating Conditions
Range: 9.4 hours
Ground Pressure
Minimum: 13 psi | Maximum: 17.3 psi
Operating Speed
Maximum Ground - Low: 50 ft/min | Maximum Ground - High: 133 ft/min | Conveyor Belt Range: 0-1070 fpm
Hydraulics
Oil Filter
Full flow
Hydraulic Capacity
Oil Tank: 152 gal
Maximum Pressure
Pressure Setting: 2500 psi
Hydraulic Pump
Flow at Maximum RPM: 27.9 gpm
Pump Type
pressure-and-flow-compensated (load-sensing)
Dimensions
Track Length
177.5 in
Height
Range: 146" (370.8 cm) | Discharge Range: 72" or 86" (182.9 cm or 218.4 cm)
Width
Track Pad Range: 26" (66 cm), 28"(71.1 cm), 30" (76.2 cm) | Ranges: 118"-120" (292.1 cm - 304.8 cm) | Belt: 30 in
Dimensions
Approach Angle: 16 deg | Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles): 35 deg | Conveyor Shift Distance Range: 65" and 125" (165.1 cm and 317.5 cm)
Length
with 40" (101.6 cm) End Idler and 14 ft (4.27 m) Boom (with Restraint Bar): 37.3 ft | with 50" (127 cm) End Idler and 8 ft (2.44 m) Boom: 39.8 ft | with 50" (127 cm) End Idler and 10 ft (3.05 m) Boom: 42.3 ft | with 50" (127 cm) End Idler and 12 ft (3.66 m) Boom: 43 ft | with 50" (127 cm) End Idler and 14 ft (4.27 m) Boom (with Restraint Bar): 45.3 ft | Conveyor: 168" or 228" (426.7 or 579.1 cm)
Capacities
Fuel Capacity
Tank: 270 gal | Fuel Consumption at Full Load: 28.9 gph
Weights
Weight
Range: 120,000 lb - 170,000 lb (54,431.1 kg - 77,110.7 kg)
Features
Conveyor Type
Curved
Oil Type
Vermeer HyPower 68 or Vermeer HyPower 100
Track Type
Drive: Dual path hydrostatic with planetary transmission | Pad: Single, double or triple grouser
Features
Track Size: CAT 350 Excavator | Parking and Emergency Brake: spring-applied, hydraulic release, wet disc brake | Trencher: Yes | Terrain Leveler: Yes | Control System: TEC Plus with SmartTEC | Service Brakes: Hydrostatic | Conveyor Belt Style: Cleated or finger type | Discharge Direction: Right or left