2025 Vermeer® Surface Miners T1155III

Information

2025 Vermeer® Surface Miners T1155III

SmartTEC performance monitoring assists operators with adjustments to machine controls to help improve efficiency and tracks the operational performance of the machine on a consistent platform across all machine models.

The elevating rollover protective module cab features LEXAN glass, filtered and pressurized air, heating and air-conditioning. The cab’s vantage point allows an optimal view of the boom, trench and conveyor.

A rotary power trencher drive motor and splined headshaft produce a low speed and high torque which provide maximum ground penetration and low chain wear for optimal production results.

Features may include:

  • Ideal for large rock excavation applications including surface mining, overburden removal, site preparation and road demolition
  • The T1155III surface miner is equipped with a Caterpillar® C15 ACERT Tier 3 or Tier 4 Final electronic engine, giving you the power needed to level surfaces on your construction or mining site
  • Pair this with a top-down cutting system to achieve greater rock penetration
  • Conduct surface mining extraction, remove ground surface, or create a smooth, level area for construction site preparation

Photos

Highlights

  • Blackshear, Georgia
  • 2025
  • Vermeer®
  • Surface Miners T1155III
  • Available
  • Track Pad Range: 26" (66 cm), 28"(71.1 cm), 30" (76.2 cm) | Ranges: 118"-120" (292.1 cm - 304.8 cm) | Belt: 30 in
  • Range: 146" (370.8 cm) | Discharge Range: 72" or 86" (182.9 cm or 218.4 cm)

Specifications

  • 2025
  • Vermeer®
  • Surface Miners
  • T1155III
  • Mining
  • 6
  • 2100 rpm
  • Gross: 540 hp
  • Medium: Liquid
  • Dry-type with pre-cleaner
  • Caterpillar C15 ACERT Tier 3
  • Turbocharged and air-to-air aftercooled
  • 24 Volt DC
  • Range: 9.4 hours
  • Minimum: 13 psi | Maximum: 17.3 psi
  • Maximum Ground - Low: 50 ft/min | Maximum Ground - High: 133 ft/min | Conveyor Belt Range: 0-1070 fpm
  • Full flow
  • Oil Tank: 152 gal
  • Pressure Setting: 2500 psi
  • Flow at Maximum RPM: 27.9 gpm
  • pressure-and-flow-compensated (load-sensing)
  • Approach Angle: 16 deg | Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles): 35 deg | Conveyor Shift Distance Range: 65" and 125" (165.1 cm and 317.5 cm)
  • 177.5 in
  • Range: 146" (370.8 cm) | Discharge Range: 72" or 86" (182.9 cm or 218.4 cm)
  • Track Pad Range: 26" (66 cm), 28"(71.1 cm), 30" (76.2 cm) | Ranges: 118"-120" (292.1 cm - 304.8 cm) | Belt: 30 in
  • with 40" (101.6 cm) End Idler and 14 ft (4.27 m) Boom (with Restraint Bar): 37.3 ft | with 50" (127 cm) End Idler and 8 ft (2.44 m) Boom: 39.8 ft | with 50" (127 cm) End Idler and 10 ft (3.05 m) Boom: 42.3 ft | with 50" (127 cm) End Idler and 12 ft (3.66 m) Boom: 43 ft | with 50" (127 cm) End Idler and 14 ft (4.27 m) Boom (with Restraint Bar): 45.3 ft | Conveyor: 168" or 228" (426.7 or 579.1 cm)
  • Tank: 270 gal | Fuel Consumption at Full Load: 28.9 gph
  • Range: 120,000 lb - 170,000 lb (54,431.1 kg - 77,110.7 kg)
  • Track Size: CAT 350 Excavator | Parking and Emergency Brake: spring-applied, hydraulic release, wet disc brake | Trencher: Yes | Terrain Leveler: Yes | Control System: TEC Plus with SmartTEC | Service Brakes: Hydrostatic | Conveyor Belt Style: Cleated or finger type | Discharge Direction: Right or left
  • Curved
  • Vermeer HyPower 68 or Vermeer HyPower 100
  • Drive: Dual path hydrostatic with planetary transmission | Pad: Single, double or triple grouser