2025 Vermeer® Surface Miners T1655III
- Year 2025
- Make Vermeer®
- Model Surface Miners
2025 Vermeer® Surface Miners T1655III
2025 Vermeer® Surface Miners T1655III
Drive motors attached directly to the cutter drum improve efficiencies and reduce wear associated with chain, sprocket and belt transmissions.
Top-down cutting, as developed by Vermeer, allows the cutter teeth to gain penetration without using the machine’s tractive effort to drive the teeth into the material.
SmartTEC performance monitoring assists operators with adjustments to machine controls to help improve efficiency and tracks the operational performance of the machine on a consistent platform across all machine models.
The T1655III dual tracks and low center of gravity allow for maneuverability and stability over the changing and diverse surface conditions.
Features may include:
- Dual Cat® engines deliver 1,200 hp (895 kW) to the machine
- Smooth, quiet ride for the operator in the typically harsh environment of a mining operation
- Conduct surface mining extraction, remove ground surface, or create a smooth, level area for site preparation
Engine
Cylinder Liners
6
Rated Engine Speed
1800 rpm
Engine Power
Gross: 1200 hp
Cooling
Medium: Liquid
Air Cleaner
Dry-type with precleaner
Aspiration
Turbo charged and aftercooled
Engine Manufacturer
2 - Caterpillar C-18 engines ACERT Tier 3
Electric
Electrical
24 volt
Operational
Operating Conditions
Range: 13.2 hours
Ground Pressure
Minimum: 25.8 psi | Maximum: 25.8 psi
Operating Speed
Maximum Ground - Low: 45.7 ft/min | Maximum Ground - High: 103.9 ft/min | Conveyor Belt Range: 0-1070 fpm
Hydraulics
Oil Filter
Full flow
Hydraulic Capacity
Oil Tank: 440 gal
Maximum Pressure
Pressure Setting: 2500 psi
Pump Type
Pressure- and flow-compensated
Hydraulic Pump
Flow at Maximum RPM: 66.4 gpm
Dimensions
Track Length
215.6 in
Cutting Width
Terrain Leveler: 180 in
Width
Track Pad Range: 36" | Ranges: 20.4' (6.2 m) - with Terrain Leveler attachment
Height
Range: 201 in (510.5 cm) not including handrails | Discharge Range: 72" or 86" (182.9 cm or 218.4 cm)
Dimensions
Approach Angle: 15 deg | Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles): 35 deg | Conveyor Shift Distance Range: 65" and 125" (165.1 cm and 317.5 cm)
Capacities
Fuel Capacity
Tank: 800 gal | Fuel Consumption at Full Load: 60.5 gph
Weights
Weight
Range: 410,000 lb (185,972.9 kg)
Features
Conveyor Type
Curved
Oil Type
HyPower 68, HyPower 100, Hy Power 1100
Track Type
Drive: Dual path hydrostatic planetary transmission | Pad: Double grouser with dirt relief
Features
Track Size: Berco Hitachi EX1100 | Parking and Emergency Brake: Wet disc, spring-applied hydraulic release | Trencher: Yes | Terrain Leveler: Yes | Control System: TEC Plus with SmartTEC | Service Brakes: Hydrostatic | Conveyor Belt Style: Cleated or finger type | Discharge Direction: Right or left | Air Conditioner/Heater: Yes, two units | Air Suspension Seat: Yes, two units